HP 8500 DN To install the black toner cartridge, Swing the upper blue lever back to the left

Page 24

To install the black toner cartridge

1Remove the black toner cartridge from its packaging and gently rock the cartridge several times to distribute the toner.

C a u t i o n

Do not lift or remove the shutter (A) on the cartridge.

2Align the arrow on the top of the cartridge with the arrow at the top of the slot in the printer and slide the cartridge into the printer.

3Place one hand on the cartridge and use the other hand to pull the orange ring and remove the seal. Discard the seal.

N o t e

If toner gets on fabric, wipe the toner off with a dry cloth and then wash the clothing in cold water. Warm water or the heat of a dryer will set toner into fabric.

4Swing the upper (blue) lever back to the left.

N o t e

If the lever does not return to its original position, make sure that the black toner cartridge and the imaging drum are all the way in the printer and that the orange seal was removed from the toner cartridge.

20 Step 6: Installing the Consumables

EN

Image 24
Contents 8500, 8500 N, 8500 DN Printer Page Getting Started Guide Copyright Information Contents Where Is the User’s Guide? Additional Reference MaterialsPreparing a Location for Printer Unpacking the Printer To unpack the printer Page T e U t i o n Installing the Cables To connect the power cord to a printer with a standT e Page R N I N G Connecting the Printer to Network To connect to a 10Base-T or 100Base-TX networkTo connect to a 10Base2 network To connect to a LocalTalk networkTo connect a parallel cable To replace the overlay Selecting the Display Language To select the printer control panel languageInstalling the Consumables To install the imaging drum To install the black toner cartridge Swing the upper blue lever back to the leftTo install the color toner cartridges Installing the Consumables Close the clear door Loading the Input Trays Loading media into trays 2 T e T e Loading media in the optional tray T e Configuring Input Trays Selecting the Mode for TrayTo configure the mode for tray Configuring Media Type and Size To configure media type and sizePage To verify communication with a parallel cable HP JetDirect 10/100TX print server Installing the Software Understanding the SoftwareStructure of CD-ROM1 Accessing the Online User’s Guide To install the online user’s guide to your hard diskTo access the online user’s guide from the hard disk To access the online user’s guide from the CD-ROMAdditional Information Windows Network Installation Installation Type Components InstalledConfiguring the Printer on the Network Distributing the Printer Software to Network ClientsCreating Disk Images with Disk Copy Installing the Printer Software for Network Clients Windows Network Installation Click Settings Click Printers IBM LAN Network Installation Installing the Printer Software for IBM LAN ServerNetwork adapter for example, DLC or TCP/IP Connecting Network Clients to the Printer Select Other OS/2 printer driverMacintosh Network Installation Installing the Macintosh Printer SoftwareTo install printer software for system 7.5 or later To install printer software for system 7.0 orTo configure the printer driver manually To connect to the printer automaticallyMacintosh Network Installation Troubleshooting Checklist Problem or Error Message SolutionTroubleshooting Checklist Page C3983-90901