HP 8500 DN, 8500 N, Pro 8500 manual T e

Page 30

5Adjust the left media guide by pushing it in (A) and lifting it up and out (B).

6Position the guide over the appropriate media size marked in the tray.

7Press the guide into the rear slot (C), and then lower it down (D) into the front slot (E). Make sure the guide is not skewed.

8Load media into the tray up to the media-fill mark. For example, up to 500 sheets of 20 lb (75 g/m2) bond paper will fit in the tray. For information on loading and orienting media, see the online user’s guide or the quick reference guide.

N o t e

Do not fill input trays above the media-fill mark. Too much media in the input trays can cause media jams.

26 Step 7: Loading the Input Trays

EN

Image 30
Contents 8500, 8500 N, 8500 DN Printer Page Getting Started Guide Copyright Information Contents Where Is the User’s Guide? Additional Reference MaterialsPreparing a Location for Printer Unpacking the Printer To unpack the printer Page T e U t i o n Installing the Cables To connect the power cord to a printer with a standT e Page R N I N G Connecting the Printer to Network To connect to a 10Base-T or 100Base-TX networkTo connect to a 10Base2 network To connect to a LocalTalk networkTo connect a parallel cable To replace the overlay Selecting the Display Language To select the printer control panel languageInstalling the Consumables To install the imaging drum To install the black toner cartridge Swing the upper blue lever back to the leftTo install the color toner cartridges Installing the Consumables Close the clear door Loading the Input Trays Loading media into trays 2 T e T e Loading media in the optional tray T e Configuring Input Trays Selecting the Mode for TrayTo configure the mode for tray Configuring Media Type and Size To configure media type and sizePage To verify communication with a parallel cable HP JetDirect 10/100TX print server Installing the Software Understanding the SoftwareStructure of CD-ROM1 Accessing the Online User’s Guide To install the online user’s guide to your hard diskTo access the online user’s guide from the hard disk To access the online user’s guide from the CD-ROMAdditional Information Windows Network Installation Installation Type Components InstalledConfiguring the Printer on the Network Distributing the Printer Software to Network ClientsCreating Disk Images with Disk Copy Installing the Printer Software for Network Clients Windows Network Installation Click Settings Click Printers IBM LAN Network Installation Installing the Printer Software for IBM LAN ServerNetwork adapter for example, DLC or TCP/IP Connecting Network Clients to the Printer Select Other OS/2 printer driverTo install printer software for system 7.5 or later Macintosh Network InstallationInstalling the Macintosh Printer Software To install printer software for system 7.0 orTo configure the printer driver manually To connect to the printer automaticallyMacintosh Network Installation Troubleshooting Checklist Problem or Error Message SolutionTroubleshooting Checklist Page C3983-90901