HP 8500 DN, 8500 N, Pro 8500 manual T e

Page 33

5Load media into the tray up to the media-fill mark. For example, up to 2,000 sheets of 20 lb (75 g/m2) bond paper will fit in the tray. For information on loading and orienting media, see the online user’s guide or the quick reference guide.

N o t e

Do not place anything in tray 4 to the left of the media guides (C) or the printer will not lift media out of the tray. Also, do not fill media above the media-fill mark on the left media guide. Too much media in the tray can cause media jams.

6Press down on all four corners of the media stack to ensure the media rests flat in the tray.

7Close tray 4.

Set the media type for tray 4 in the printer control panel. For instructions, see “Step 8: Configuring Input Trays.”

N o t e

Always configure the media type in the printer control panel to prevent users from printing on the wrong media type.

EN

Step 7: Loading the Input Trays 29

Image 33
Contents 8500, 8500 N, 8500 DN Printer Page Getting Started Guide Copyright Information Contents Additional Reference Materials Where Is the User’s Guide?Preparing a Location for Printer Unpacking the Printer To unpack the printer Page T e U t i o n To connect the power cord to a printer with a stand Installing the CablesT e Page R N I N G To connect to a 10Base-T or 100Base-TX network Connecting the Printer to NetworkTo connect to a LocalTalk network To connect to a 10Base2 networkTo connect a parallel cable To replace the overlay To select the printer control panel language Selecting the Display LanguageInstalling the Consumables To install the imaging drum Swing the upper blue lever back to the left To install the black toner cartridgeTo install the color toner cartridges Installing the Consumables Close the clear door Loading the Input Trays Loading media into trays 2 T e T e Loading media in the optional tray T e Configuring Input Trays Selecting the Mode for TrayTo configure the mode for tray To configure media type and size Configuring Media Type and SizePage To verify communication with a parallel cable HP JetDirect 10/100TX print server Installing the Software Understanding the SoftwareStructure of CD-ROM1 To install the online user’s guide to your hard disk Accessing the Online User’s GuideTo access the online user’s guide from the hard disk To access the online user’s guide from the CD-ROMAdditional Information Installation Type Components Installed Windows Network InstallationConfiguring the Printer on the Network Distributing the Printer Software to Network ClientsCreating Disk Images with Disk Copy Installing the Printer Software for Network Clients Windows Network Installation Click Settings Click Printers Installing the Printer Software for IBM LAN Server IBM LAN Network InstallationNetwork adapter for example, DLC or TCP/IP Select Other OS/2 printer driver Connecting Network Clients to the PrinterInstalling the Macintosh Printer Software Macintosh Network InstallationTo install printer software for system 7.5 or later To install printer software for system 7.0 orTo connect to the printer automatically To configure the printer driver manuallyMacintosh Network Installation Problem or Error Message Solution Troubleshooting ChecklistTroubleshooting Checklist Page C3983-90901