HP 8500 DN, 8500 N Selecting the Display Language, To select the printer control panel language

Selecting the Display Language

Use the printer control panel to set the printer to display printer messages and print configuration pages in a variety of supported languages.

To select the printer control panel language

1Hold down [Select] while turning the printer on (power button in). CONFIG LANGUAGE (in English) appears on the printer control panel display for approximately one second. Once the printer has restarted, LANGUAGE = ENGLISH will appear on the display.

N o t e	Only [–]Value]+], [Select], and [Go] are active while the display
	language is being configured. All other keys are ignored.
	If you press [Go] without selecting a language, the printer will bring
	itself online and all subsequent messages will be displayed in English.
	However, since no display language was selected, the LANGUAGE =
	ENGLISH message will reappear (after the power-on self test) when the
	printer is next turned on. This message will be displayed every time the
	printer is turned on until you select a language through the configure
	language mode.

2Press [–]Value]+]until the language you want appears on the display.

3Press [Select] to save the selection.

An asterisk (*) appears to the right of the selection. The language selected will be the default language until another selection is made by restarting the printer in the configure language mode.

4Press [Go].

5Turn the printer off (power button out).

EN Step 5: Changing the Printer Control Panel Overlay and Language (Optional) 17