14Remove the packing tape from tray 4.
15Open the media transfer door and remove the orange packing spacers.
16Firmly grip the handle in the center of tray 4, squeeze the release lever, and pull the tray out until it stops.
17Remove the two orange packing clips from inside tray 4 by squeezing the sides of the clips and pulling them out.
C a u t i o n
Leaving the orange clips in tray 4 can damage the tray.
18Close all doors and input trays.
19Remove the protective film from the printer control panel display.
By completing steps 1 through 19 above, all tape and spacers should be removed and unpacking of the printer should be complete.
8 Step 2: Unpacking the Printer
EN