Internal control-panel cable
1.Remove the following items:
●Flatbed unit. See Flatbed scanner assembly on page 96.
●Upper flatbed ribbon guide. See Power supply on page 99 (steps 2 and 3).
2.Use
1
2
3
Figure 5-98 Removing the internal control-panel cable (1 of 2)
3.Disconnect the internal control-panel cable from the left side of the interconnect board (callout 3).
3
Figure 5-99 Removing the internal control-panel cable (2 of 2)
110 Chapter 5 Removal and replacement | ENWW |