e.Print the second pass (second copy of the file). The final calibration target must look like the following figure.
Figure 6-2 Scanner calibration target
CAUTION: If the calibration target does not look like the figure shown here, the calibration process will fail and the quality of the
To calibrate the scanner
Use the following procedure to calibrate the scanner:
1.Take the calibration target to the digital sender.
2.Place it into the scanner ADF
3.Press the Menu button, touch DIAGNOSTICS on the
CALIBRATE SCANNER.
4.After the calibration target has passed through the ADF once, reposition it in the ADF face down.
5.After completing the second pass, position the target on the scanner glass and initiate the final pass.
130 Chapter 6 Troubleshooting | ENWW |