5.At the back of the device, use a flat blade screwdriver to pry two tabs (callout 3) toward you at the bottom ends of the tabs.
Figure 5-34 Removing the control-panel cover assembly (3 of 6)
6.Unhook the white plastic arm by gently pulling the tab toward you.
Figure 5-35 Removing the control-panel cover assembly (4 of 6)
7.Lift the control-panel cover assembly off of the device, rotate the front of the assembly toward the back of the device, and then set the assembly down on the work surface.
ENWW | External components and covers 61 |