HP 6980 manual

Contents HP Deskjet 6980 series Acknowledgements AccessibilityHewlett-Packard Company notices Terms and conventionsContents HP Deskjet 6980 series HP Report Print an HP ReportUnderstand the HP Report Wireless URLNetwork Name Ssid Embedded Web server EWS MiscellaneousItem Meaning Change wireless security settings Problem Configure the printer for a software firewallConfigure the printer Under the Connections heading, click WirelessSolution Assign the printer a static IP address Get readyReset the printer to factory default settings Assign the static IP addressOption Default setting Chapter During software installation Connect the Ethernet cable if it is not connectedCheck the Network light Disable any software firewall running on the computer Verify that the computer is connected to the networkPlace the printer and the computer on the same subnet Check the Signal Strength Wireless Access Point WAP filters by MAC address Under the Connections heading click Wireless After software installationNetwork settings are wrong or have changed Software firewall is blocking access to the printerSecureEasySetup setup errors Printer and the computer are not on the same subnetError message Low signal Chapter During installation Computer cannot find the printerComputer and the printer are on different subnets Computer and the printer are on the same subnet Printer and the computer are on different subnets Network settings have changed Click the IP Configuration tabChapter Page Page Page C8969-90031