HP 6980 manual Url, Wireless

Page 6

Chapter 1

(continued)

 

 

Item

Meaning

URL

The address to use in order to open the printer's embedded Web

 

server.

Hardware

The printer's Media Access Control (MAC) address.

Address (MAC)

 

 

Firmware

Revision number of the printer's internal software.

Revision

This item might be requested by HP Service and Support.

 

Host Name

The printer's host name on the network.

IP Address

The printer's current IP address on the network.

Subnet Mask

The printer's subnet mask.

Default Gateway

The printer's gateway address.

Configuration

How the printer obtained its IP address:

Source

Automatic: AutoIP or DHCP

 

 

Manual: Static IP address

DNS Server

The IP address of the printer's domain name server. Not

 

Specified means that no IP address has been set. This setting

 

does not apply to the printer.

mDNS

The printer's mDNS service name on the network.

 

This name is used by Apple Rendezvous (Mac OS X v10.2.3 and

 

higher) and Bonjour (Mac OS X v10.4.0 and higher) to identify

 

the printer.

Admin

Indicates whether the printer's embedded Web server is

Password

password protected.

 

Set: A password is required.

 

Not Set: A password is not required.

Link Config

The network link configuration:

 

802.11

 

10T-Full

 

10T-Half

 

100TX-Full

 

100TX-Half

802.11 wireless

The 802.11 wireless information applies only to the printer's wireless connection:

4

HP Deskjet 6980 series

Image 6
Contents HP Deskjet 6980 series Acknowledgements AccessibilityHewlett-Packard Company notices Terms and conventionsContents HP Deskjet 6980 series HP Report Print an HP ReportUnderstand the HP Report Wireless URLNetwork Name Ssid Embedded Web server EWS MiscellaneousItem Meaning Change wireless security settings Problem Configure the printer for a software firewallConfigure the printer Under the Connections heading, click WirelessSolution Assign the printer a static IP address Get readyReset the printer to factory default settings Assign the static IP addressOption Default setting Chapter During software installation Connect the Ethernet cable if it is not connectedCheck the Network light Disable any software firewall running on the computer Verify that the computer is connected to the networkPlace the printer and the computer on the same subnet Check the Signal Strength Wireless Access Point WAP filters by MAC address Under the Connections heading click Wireless After software installationNetwork settings are wrong or have changed Software firewall is blocking access to the printerSecureEasySetup setup errors Printer and the computer are not on the same subnetError message Low signal Chapter During installation Computer cannot find the printerComputer and the printer are on different subnets Computer and the printer are on the same subnet Printer and the computer are on different subnets Network settings have changed Click the IP Configuration tabChapter Page Page Page C8969-90031
Related manuals
Manual 154 pages 17.26 Kb