HP 6980 manual Embedded Web server EWS, Miscellaneous, Item Meaning

Page 8

Chapter 1

Miscellaneous

The Miscellaneous section contains information that applies to both Ethernet and wireless networks and PictBridge connections:

Item Meaning

Total Packets Transmitted

Total Packets Received

PictBridge Status

PictBridge Last Error

Number of packets sent without error.

This item might be requested by HP Service and Support.

Number of packets received without error.

This item might be requested by HP Service and Support.

Connected: The printer is connected to a digital camera.

Error: Something is wrong with the PictBridge connection.

The last known error to occur in the printer PictBridge function since the printer was last turned on.

Embedded Web server (EWS)

The printer has an internal Web page, called the embedded Web server (EWS) that you can open with an Internet browser. The EWS provides a simple way to manage the printer on a network.

Use the printer's EWS to do the following:

Check the printer's status.

Adjust the printer's network configuration.

Check estimated ink levels in the print cartridges.

View network statistics.

Configure the printer's wireless security settings.

Configure Bluetooth settings.

Visit HP's Web site for support information and to purchase supplies.

Caution It is recommended that the printer and the computers that use it be on the same subnet. Printer installation across subnets can be problematic depending on the type of router used.

Before using the printer's internal Web page, verify that the printer and the computer are powered on and connected to the network.

6

HP Deskjet 6980 series

Image 8
Contents HP Deskjet 6980 series Accessibility Hewlett-Packard Company noticesAcknowledgements Terms and conventionsContents HP Deskjet 6980 series Understand the HP Report HP ReportPrint an HP Report Wireless URLNetwork Name Ssid Item Meaning Embedded Web server EWSMiscellaneous Change wireless security settings Configure the printer for a software firewall Configure the printerProblem Under the Connections heading, click WirelessSolution Assign the printer a static IP address Get readyReset the printer to factory default settings Assign the static IP addressOption Default setting Chapter Check the Network light During software installationConnect the Ethernet cable if it is not connected Place the printer and the computer on the same subnet Disable any software firewall running on the computerVerify that the computer is connected to the network Check the Signal Strength Wireless Access Point WAP filters by MAC address After software installation Network settings are wrong or have changedUnder the Connections heading click Wireless Software firewall is blocking access to the printerSecureEasySetup setup errors Printer and the computer are not on the same subnetError message Low signal Chapter During installation Computer cannot find the printerComputer and the printer are on different subnets Computer and the printer are on the same subnet Printer and the computer are on different subnets Network settings have changed Click the IP Configuration tabChapter Page Page Page C8969-90031
Related manuals
Manual 154 pages 17.26 Kb