![](/images/new-backgrounds/1284977/28497735x1.webp)
For Windows
The printer driver software runs on Windows NT 4.0, Windows 98 and above and lets you print via the USB or parallel cable.
The setup software detects the version of the operating system that you are using. If you install a new version of Windows later, you must reinstall the printer driver. For example, if you upgrade from Windows 98 to Windows 2000, you must reinstall the printer driver.
Making copies of the printer software
The Starter CD contains a utility that lets you copy the printer software on to disks. When you run the setup program, select Customization Utility to copy disks.
You can also use this utility to copy the printer software to your hard drive or to a network drive. After the files are copied to another location, you can install the printer software from that location.
To install the printer driver
Before you can install the printer driver, you must complete steps 1 through 5 in
Setting up the printer.
You must have administrator privileges to install a printer driver on a computer running Windows NT 4.0, Windows 2000 or Windows XP.
1Start Windows and make sure no other applications are running.
2Insert the Starter CD into your
ENWW |