Understanding printer parts and functions
Front view
1 |
2 |
3 |
6
7 |
8 |
9 |
4 |
5 |
57
56 58
10 |
1Input tray extension – Slides up to support larger print media. This prevents possible media feed problems. Pull this up for all media except A5 paper and cards.
2Input tray – Holds the media. Remove media and close this tray when the printer is not in use.
3Paper guide – Slides to fit the width of the media. Guides paper edge and prevents paper skew.
4Card slot – Flips down to feed media of 4.72 in (120 mm) width or less, such as 4 x 6 in index cards, small photo media and Japanese Hagaki cards. Ensures that media is properly aligned for correct print margins.
5Alignment guide – Guides larger media such as Letter or A4 loaded in the input tray into the printer. Ensures that media is properly aligned for correct print margins.
6Print cartridge latch – Facilitates easy removal and insertion of print cartridges. Lifts to allow each print cartridge to be removed from its socket.
7Print cartridge socket – Holds the print cartridge.
8Output slot – Media exits printer from here.
9Front access cover – Provides access to the print cartridges and for clearing paper jams. This cover must be closed in order to print.
10Infrared port – Enables printing from an
ENWW |