Press the CANCEL BUTTON if you do not want to print directly from the CF card. If your computer is connected to the printer via USB or parallel, the CF card appears as a drive in Windows Explorer. You can then open and print your photographs with the software application of your choice.
Do not remove the CF card until the print job is completed. Otherwise the print job will be canceled.
Selecting Typical Installation when you install the printer driver (see Installing Software) lets your computer read the CF card as a physical disk drive. You can then access your photo files and print them with the software of your choice. Please see the readme.txt file on the Starter CD for more details.
Printing on transparencies
For best results, use HP Premium Plus Inkjet Transparency Film, which is specifically designed to work with the printer, or other transparency film that is designed for inkjet printers.
1Remove all media from the input tray.
2Insert the transparencies with the print (rough) side up and the adhesive strip pointing forward into the input tray.
Due to the printer's unique paper path, please load transparencies with the print side up. The print side of the transparencies is the rougher side.
3Slide the paper guide until it stops at the edge of the transparencies.
1Back of adhesive
2Print (rough) side up
For PDA printing instructions, refer to the documentation that comes with your PDA printing software.
ENWW |