3Lift the print cartridge latch open and gently remove the print cartridge from its socket at the angle shown below.
Check the number on the latch against the number on the new print cartridge to make sure you are removing the correct print cartridge.
56
4Insert the new print cartridge into its socket at the same angle at which you removed the old print cartridge.
Check the number on the latch against the number on the print cartridge to make sure you are inserting the correct print cartridge.
56
5Close the print cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the cartridge into its socket. Press the latch to make sure it is seated flat on the cartridge.
57
56 58
6Close the front access cover.
7Wait for the carriage to complete the print cartridge initialization routine and return to the home position at the right side of the printer before using the printer.
Do not open the front access cover until the print cartridge initialization is complete.
After the print cartridge is replaced, you need to align the print cartridges. See
Aligning the print cartridges.
ENWW |