![](/images/new-backgrounds/1284977/28497755x1.webp)
Viewing the HP Inkjet Utility panels
The following options are available on the HP Inkjet Utility Panel menu.
WOW!: Prints a sample page to view the print output quality.
Test: Prints a test page or a diagnostic page.
Clean: Cleans the print cartridges.
Calibrate Device: Aligns the print cartridges.
Calibrate Color: Adjusts color to correct problems with tint.
Battery Level: Displays battery charge level information.
Configure Printer Settings: Lets you configure DPOF settings to print from a CompactFlash card using DPOF files.
Estimate Ink Levels: Displays print cartridge ink levels.
Support: Provides access to the HP website where you can find support for the printer and information about HP products and supplies.
Register: Accesses the HP website to register the printer.
Two-sided printing
You can print on both sides of a sheet of paper by manually turning a sheet of paper over and feeding it into the printer again.
To print on both sides of a page, you must specify duplex options in your software application or in the printer driver.
For best results when printing, do not print on paper heavier than 24 lb bond (90 g/m2) or on both sides of labels or transparencies.
For Windows
1Load the appropriate paper into the input tray. Be sure to load the paper with the print side up.
2Click Start > Settings > Printers to open the Printers folder.
3
•Printing Preferences (Windows 2000 and Windows XP)
•Properties (Windows 98 and Windows Me)
•Document Defaults (Windows NT 4.0)
4Click the Features tab, and then under Document Options, click
5Click Long Side or Short Side to select the page orientation.
ENWW |