
Message | Explanation | Recommended Action |
AUTO-DUPLEX UNIT NOT AVAILABLE PRESS RESUME OR CANCEL
The
If you have purchased the
REINSERT [number]
PAGES INTO [TRAY ]
This message is for manual duplexing. Indicates that printing on the first side of the media is complete.
Take the printed stack of paper from the output tray and put it back into the specified tray.
ROTATE AND REINSERT [number] PAGES INTO [TRAY]
This message is for manual duplexing. Indicates that printing on the first side of the media is complete.
Take the printed pages from output tray, rotate the stack 180 degree horizontally and put it back to the specified tray.
PRINTHEAD ACCESS | The printhead access latch is |
LATCH OPEN | open. |
Open the printhead cover, close the printhead access latch, and then close the printhead cover. You will have to use some force to close the printhead access latch. If the printhead access latch will not close, ensure that the printheads are seated properly by pushing down firmly on each printhead.
REAR ACCESS PANEL | The rear access panel is not | Make sure the rear access |
OPEN | installed correctly or at all in | panel is inserted correctly and |
| the printer. | completely into the printer. |
|
|
|
LANGUAGE= | Displays the language in | For information about |
[LANGUAGE] | which the LCD shows | changing the display |
| messages. | language, see “Setting the |
|
| LCD language.” |
|
|
|
ENWW |