HP 6120 manual Built-in ethernet, Lights, Network configuration, Internal web

FDR_RG.book Page 9 Wednesday, July 31, 2002 9:38 AM

built-in ethernet

The printer’s built-in ethernet feature allows the printer to be connected to an ethernet network without the need for an external print server.

Only Macintosh computers running Mac OS 9.04+ or Mac OS X v10.1+ and that support TCP/IP can communicate with the printer via the printer’s built-in ethernet feature. The printer does not support AppleTalk.

english

LINKACT

￿￿

1. link light 2. activity light

lights

The Link light is solid when the printer is powered on and connected to an ethernet network.

The Activity light flashes when the printer is receiving or transmitting data over the ethernet connection.

network configuration page

The network configuration page provides useful information about the printer’s ethernet connection.

To print a network configuration page, press the Cancel button (X) while the printer is powered on and idle.

internal web page

Use the printer’s internal web page to view network data and configure network settings.

Follow these steps to open the printer’s internal web page:

1.Verify that the printer and your computer are both connected to the network.

2.Launch your Internet browser (use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher).

3.Enter the printer’s URL in the browser’s Address box, then press

Enter.

If you don’t know the printer’s URL, print a network configuration page. The printer’s URL is item 2 on the page.

9