HP 6005 manual Technical Specifications Audio, High Definition Audio Type, Codec Audio Jacks

QuickSpecs

HP Compaq 6005 Pro Business PC

Technical Specifications - Audio

High Definition Audio Type	Integrated
High Definition Stereo Yes – 4-channel Realtek ALC261 codec
Codec
Audio Jacks	Front microphone-In (150-K ohm Input Impedance)
	Rear Line-In/Microphone input (150-K ohm Input Impedance, function is
	configurable by audio driver)

Rear Line-Out*(190 ohms Output Impedance, expects at least a 10-K ohm load)

Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)

NOTES:

Internal Speaker Amplifier is for Internal Speaker only. External Speakers need to be powered externally.

The rear input port can function as a Line-In or Microphone-In jack.

The front Microphone jack is retaskable to support headphones. When functioning as a headphone jack the same audio stream will be sent to both front jacks.

The front Microphone jack is also retaskable to function as a Line-in jack.

The Realtek Control Panel software required to reassign audio ports is preloaded but must be installed by the customer before these functions can be performed.

Multistreaming	Multistreaming can be enabled in the Realtek control panel to allow
Capable	independent audio streams to be sent to/from the front and rear jacks.
Sampling	8 kHz – 192 kHz
Wavetable Syntheses	Yes – Uses OS soft wavetable
(software)
Analog Audio	Yes
Number of Channels	Stereo (Left & Right channels)
on Line-Out
(mono/stereo)

Internal Audio Speaker 1.5 W

Power Rating

Internal Speaker Yes; ability to mute internal speaker through F10 Setup

External Speaker Jack Yes (Line-Out)

DA - 13412 Worldwide QuickSpecs — Version 6 — 10/14/2009 Page 18