HP B6191-90015a manual Environment Variables, Integer must be 12 or greater

Using the Diagnostic/IPR Media to Run Offline Diagnostics

Test Module Manager (TMMGR) .

Logging Screen

To enter the logging screen, type LOG at the command prompt. The logging screen displays detailed information that each TM may have output during its execution. One can display the various pages of the log to correlate a failing test with any associated error information that the TM may have output.

Environment Screen

To enter the environment screen, type ENV at the command prompt. The following is an example environment screen:

Commands: EXIT, ERRCOUNT, ROWS, SCROLL, TERM, LOOP, REFRESH, HELP

	** Environment Variables **
Variable	Description	State
ERRCOUNT	Number of errors that stop test execution	0
ROWS	Number of console text rows	24
SCROLL	Activates scrolling during screen redraws	ON
TERM	Terminal type	UNKNOWN
LOOP	Number of times to loop test execution	1

%< Page 1 of 1 >

Command->

The environment screen displays each environment variable, an associated description, and its current state. Use the HELP command to get more online information about each environment variable.

Environment Variables

This section gives a brief discussion of each environment variable. Note, the command syntax for each variable indicates its legal states. A in the command syntax means or.

ROWS

ROWS <integer>

NOTE <integer> must be 12 or greater.

The ROWS environment variable indicates the number of text rows supported by the current console display.

SCROLL

SCROLL ONOFF

The SCROLL environment variable controls how screen redraws are performed. When the state of SCROLL is ON, the screen is redrawn by scrolling the current text off the top of the console display.

26 Chapter 3