HP B6191-90015a manual Next, To select all modules or tests except 3 and 4, enter

Using the Diagnostic/IPR Media to Run Offline Diagnostics

Test Module Manager (TMMGR) .

NEXT

NEXT (N)

Use this command to display the next page of the system screen, the environment screen, the logging screen, or a test screen. Note, <Ctrl>-N (N) can be used as a shortcut for this command.

PREV

PREV (P)

Use this command to display the previous page of the system screen, the environment screen, the logging screen, or a test screen. Note, <Ctrl>-P (P) can be used as a shortcut for this command.

REFRESH

REFRESH

Use this command to redraw the current console display. Using this command may become necessary if the console display becomes unsynchronized with internal program data structures.

ENV

ENV

Use this command to go to the environment screen. The environment screen allows one to view and modify all environment variables.

SELECT

SELECT

<num> is an integer indicating any valid selection number. <range> is a range of selection numbers of the form A/B (A %< B). Use this command to select a group of modules to test or a group of tests to execute. A group of modules or tests is specified by explicitly specifying a list of selection numbers and/or a range of selection numbers. All tests or testable modules can be selected at once by using the command parameter, ALL. To deselect a group of modules or tests, one can prepend - to each element in the group specification. Note, elements of a group specification are processed from left to right. This fact can be used to specify groups with minimal effort.

Examples:

To select modules or tests 1, 4, 6, 7, 8, and 9, enter:

-> select 1 4 6 7 8 9 <cr> or -> select 1 4 6/9 <cr>

To select all modules or tests except 3 and 4, enter:

-> select all -3 -4 <cr>

EXIT

EXIT [ALL]

Use this command to return back to the previous screen. To exit all the way back to ISL, type EXIT ALL.

28 Chapter 3