The battery charges whether your Notebook is on or off.
It continues charging until the battery is fully charged or the AC power is disconnected.
The battery will lose its charge gradually if not used for a long time.
When maximum performance is selected, the processor operates at full (100 %) speed. When battery optimized mode is selected, the processor operates at approximately 80 % of the maximum performance mode.
Charging the Battery
To charge the battery, connect the battery to your Notebook and connect your Notebook to AC power. Leave your Notebook plugged into the electrical outlet until the Battery Charging icon glows green. This ensures that the
battery is fully charged.
Note: If you will not be using your Notebook for an
extended period of time, Compaq recommends that you unplug the electrical cord from the outlet and remove the battery while your Notebook is not
in use.
Optimizing Processor Speed
Some Presario Notebook models use the Pentium® III Processor featuring Intel® SpeedStepTM Technology. This technology gives you the capability to optimize your Notebook’s processor speeds based on the power source in use.
The default SpeedStep icons for each power source are listed below:
The checkered flag icon in the system tray on the Windows taskbar indicates External AC Power and Maximum Performance.
The
To change the setting for either power source, AC or battery, right- click the SpeedStep icon in the System Tray and select either
Battery Optimized Performance or Maximum Performance.
PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE | USING YOUR NOTEBOOK |
800 SERIES |
|