If your Notebook power is off, you will not be able to eject a disc from the CD or DVD drive. To remove a disc without powering up your Notebook, you must eject the disc from the drive manually.
3.Place the disc, label side up (unless it is a
ÄCaution: Before closing the disc tray, ensure that the disc snaps onto the spindle in the center of the tray. You can damage the disc and your Notebook if the disc is not seated properly.
4.Push the tray back into the drive until the drive locks into place.
Removing a Disc
To remove a disc from the drive, complete the following steps:
1.Press the Eject button on the drive.
2.Remove a disc from the tray, gently pushing down on the center spindle while pulling up on the outer edges. Avoid touching the surface of the disc.
3.Push the tray back into the drive until it locks into place.
PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE | USING THE CD OR DVD DRIVE |
800 SERIES |
|