Once your Notebook has entered Hibernation mode, it will not turn on until it is plugged into an AC adapter or the drained battery is replaced with a charged one.
Replace the Drained Battery with a Charged One
If you cannot connect the AC adapter but you have a charged battery, you can change to battery power and continue working. To replace the drained battery with a charged one, complete the following steps:
1.Save your work.
2.Turn off your Notebook (or initiate Hibernation).
3.Replace the drained battery with the charged one.
4.Press the Power button to turn on your Notebook.
5.Resume your work.
When AC power becomes available, repeat these same steps but insert the drained battery and charge it by plugging in the AC adapter.
Suspend Your Work
If you cannot plug in the AC adapter and you do not have a charged replacement battery, start Hibernation by pressing the Power button. When a power source (AC or battery) becomes available, press the Power button to turn your Notebook on and resume your work.
PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE | |
| 800 SERIES |