HP SL500 (M852x) manual Figures, Tables

ContentsA. Specifications

A. Specifications

Tape Library Components WeightsA-3

Tape Library EnvironmentA-3

PowerA-4

Safety and Compliance

Figures

Figure 1-1.	Front View of Tape Library Components						1-2
Figure 1-2.	Back View of Tape Library Components						1-3
Figure 1-3.	Base Module Slots		1-5
Figure 1-4.	Slots Locations for Firmware Slot Mapping1-6
Figure 1-5.	Slots Locations for SCSI Element Numbering Mapping1-7
Figure 1-6.	Slot Capacity for Back Wall of Cartridge Expansion Module1-8
Figure 1-7.	Robotics Components			1-12
Figure 1-8.	Hand Assembly	1-13
Figure 1-9.	Supported Tape Drives			1-16
Figure 1-10.	Tape Library Interfaces Locations					1-18
Figure 2-1.	Buttons and Indicators			2-2
Figure 3-1.	Sliding a Magazine Into a CAP				3-2
Figure 3-2.	Lever Not in Parked Position				3-4
Figure 3-3.	Door Locking Lever Extended				3-5
Figure 3-4.	Moving Robotics Park Lever				3-6
Figure 3-5.	Inserting Cartridges Into Slots				3-7
Figure 3-6.	Inserting Cartridge Into Tape Drive					3-8
Figure 3-7.	Location of Unload Button3-9
Figure 3-8.	Manual Release Screw			3-11
Figure 4-1.	Ultrium Cartridge Components				4-3
Figure 4-2.	LTO Cartridge Labels			4-4
Figure 4-3.	Ultrium Cartridge Label			4-5
Figure 4-4.	Write-Protect Switch		4-6
Figure 7-1.	Configuration Example			7-2
Figure A-1.	Library and Rack Dimensions				A-1
Figure A-2.	Tape Library and Rack Dimensions					A-2
Figure A-3.	Power Cabling	A-6

Tables

Table 1-1.	Cartridge Slot and Tape Drive Capacities1-10
Table 1-2.	LTO Generation 3 Specifications	1-16
Table 2-1.	Keypad Buttons and Indicators	2-3

SL500 (M852x) Tape Library Installation and User’s Guide—541531-006

iii