HP SL500 (M852x) manual Power Specifications, Table A-5. Power for Library Without Tape Drives

Page 69

Specifications

Power Specifications

Power Specifications

These tables list power specifications for the modules and tape drives.

Table A-5. Power for Library Without Tape Drives

Input voltage	100-240 VAC, single phase
Frequency	50/50 Hz
Maximum library power consumption	1.4 A @ 120 V
	0.8 A @ 240 V
Maximum heat output	614	Btu/hr
Voltage-amperes	180	VA

Table A-6. Power for Base Unit and Two LTO Tape Drives

	Two LTO Tape Drives
Input power	219 watts
Input voltage-amperes	226 voltage-amperes
Input current (100 VAC)	2.3 amperes
Input current (120 VAC)	1.9 amperes
Input current (240 VAC)	0.9 amperes
Btu/hour	748 Btu/hr

Table A-7. Power for Drive Expansion Module and Four LTO Tape Drives

	Four LTO Tape Drives
Input power	288 watts
Input voltage-amperes	297 voltage-amperes
Input current (100 VAC)	3.0 amperes
Input current (120 VAC)	2.5 amperes
Input current (240 VAC)	1.2 amperes
Btu/hour	983 Btu/hr

SL500 (M852x) Tape Library Installation and User’s Guide—541531-006

A-7

Image 69

Contents Product Version Supported Release Version Updates RVUs AbstractPart Number Published Document History Part Number Product Version Published Overview of the Tape Library SL500 M852x Tape Library Installation and User’s GuideCartridge Information Tables FiguresContents Manual Information What’s New in This ManualNew and Changed Information Document HistoryPage Notation Conventions About This ManualHypertext Links Change Bar NotationViii This section includes Overview of the Tape LibraryFront View of Tape Library Components Views and LocationsBack View of Tape Library Components Physical Configurations Base Module Slots Slots Locations for Firmware Slot Mapping Slots Locations for Scsi Element Numbering Mapping Slot Capacity for Back Wall of Cartridge Expansion Module Capacities CAP Robotics Unit Robotics Components Hand Assembly Fans ElectronicsRLC Card Interface CardsPower System Cartridge Access PortCAP Condition Specification Performance LTO Generation 3 SpecificationsSupported Tape Drives LTO UltriumCards and Power Supply Safety FeaturesAudit of Tape Library Robotics10. Tape Library Interfaces Locations InterfacesControls and Indicators Power SwitchKeypad Buttons and Indicators Buttons/Indicators Description Keypad Buttons and IndicatorsIndicator ButtonPage Opening the Front Door With Power Automated ModeSecuring the Front Door With Power Library OperationSliding a Magazine Into a CAP Powering Off the Tape Library Powering On the Tape LibraryOpening the Front Door Without Power Manual ModeDoor Locking Lever Extended Securing the Front Door Without PowerInsert Cartridges Into Slots Locate and Remove CartridgeInserting Cartridges Into Slots Inserting Cartridge Into Tape Drive Inserting a Cartridge Into a Tape DriveLocation of Unload Button Removing a Cartridge From a Tape DriveRemoving a Cartridge From the Gripper Assembly Manual Release Screw Replacing a Cleaning CartridgePage Cartridge Information Handle CartridgesInspect Cartridges Maintain Cartridges Ultrium Cartridges Apply Cartridge LabelsValid Labels Label Type of Cartridge LTO Cartridge CodesUltrium Cartridge Label Write-Protect Switch Setting the Write-Protect SwitchSpecification L3 Cartridge L2 Cartridge L1 Cartridge LTO Gen 1, Gen 2, and Gen 3 Cartridge SpecificationsPage Supported Connections Adding the Control Path and the Data PathServerNet/DA To add the data path PMF CRU PMF CRU Adding the Control Path and Data Path Supported ConnectionTo add the data path SCF, issue this command Configuration Overview Series Rear View System Configuration Example Fiber-opticAdding the Control Path and Data Path Page Figure A-1. Library and Rack Dimensions SpecificationsFigure A-2. Tape Library and Rack Dimensions Table A-1. Library Component Weights Tape Library Components WeightsTable A-2. Library Environment Specifications Tape Library EnvironmentPower Cord Numbers and Receptacles PowerTable A-3. Power Cord and Receptacles Table A-4. Non-Country-Specific CordsInstalling the Power Cords Figure A-3. Power Cabling Power Specifications Table A-5. Power for Library Without Tape DrivesTable A-6. Power for Base Unit and Two LTO Tape Drives Page Regulatory Compliance Statements Safety and ComplianceFCC Compliance Canadian ComplianceStatements-2 Laser Compliance European Union NoticeSafety Caution High Leakage Current Waste Electrical and Electronic Equipment WeeeSafety