HP SL500 (M852x) manual LTO Gen 1, Gen 2, and Gen 3 Cartridge Specifications

Page 51

Cartridge Information

Setting the Write-Protect Switch

Table 4-2. LTO Gen 1, Gen 2, and Gen 3 Cartridge Specifications

Specification	L3 Cartridge	L2 Cartridge	L1 Cartridge

Capacity, native	400 GB	200 GB	100 GB
(uncompressed)

Capacity	800 GB	400 GB	200 GB
(compressed)

Read and write	5.9 m/s	5.9 m/s	4.0 m/s
tape speed

Search and rewind	7.0 m/s	7.0 m/s	7.0 m/s
speed

Archival life	15–30 years	15-30 years	15-30 years

Number of tracks	704 tracks	512 tracks	384 tracks

Dimensions
Width	107 mm (4.2 in.)	107 mm (4.2 in.)	107 mm (4.2 in.)
Height	22.9 mm (0.9 in.)	22.9 mm (0.9 in.)	22.9 mm (0.9 in.)
Depth	102 mm (4.0 in.)	102 mm (4.0 in.)	102 mm (4.0 in.)
Weight	210.0 g (0.46 lb)	210.0 g (0.46 lb)	210.0 g (0.46 lb)

Temperature
(noncondensing)
Operating	10 to 40°C (50 to	10 to 40°C (50 to	10 to 40°C (50 to
	10 to 40°C (50 to	10 to 40°C (50 to	10 to 40°C (50 to
	104°F)	104°F)	104°F)
Shipping	-23 to 49°C (-10 to	-23 to 49°C (-10 to	-23 to 49°C (-10 to
	120°F)	120°F)	120°F)
Wet bulb	26°C (78°F)	26°C (78°F)	26°C (78°F)
Wet bulb

Humidity	20–80%	20-80%	20-80%

SL500 (M852x) Tape Library Installation and User’s Guide—541531-006

4-7

Image 51

Contents Product Version Supported Release Version Updates RVUs AbstractPart Number Published Document History Part Number Product Version Published Overview of the Tape Library SL500 M852x Tape Library Installation and User’s GuideCartridge Information Tables FiguresContents Document History What’s New in This ManualManual Information New and Changed InformationPage Change Bar Notation About This ManualNotation Conventions Hypertext LinksViii This section includes Overview of the Tape LibraryFront View of Tape Library Components Views and LocationsBack View of Tape Library Components Physical Configurations Base Module Slots Slots Locations for Firmware Slot Mapping Slots Locations for Scsi Element Numbering Mapping Slot Capacity for Back Wall of Cartridge Expansion Module Capacities CAP Robotics Unit Robotics Components Hand Assembly Interface Cards ElectronicsFans RLC CardPower System Cartridge Access PortCAP Condition LTO Ultrium LTO Generation 3 SpecificationsSpecification Performance Supported Tape DrivesRobotics Safety FeaturesCards and Power Supply Audit of Tape Library10. Tape Library Interfaces Locations InterfacesControls and Indicators Power SwitchKeypad Buttons and Indicators Button Keypad Buttons and IndicatorsButtons/Indicators Description IndicatorPage Library Operation Automated ModeOpening the Front Door With Power Securing the Front Door With PowerSliding a Magazine Into a CAP Powering Off the Tape Library Powering On the Tape LibraryOpening the Front Door Without Power Manual ModeDoor Locking Lever Extended Securing the Front Door Without PowerInsert Cartridges Into Slots Locate and Remove CartridgeInserting Cartridges Into Slots Inserting Cartridge Into Tape Drive Inserting a Cartridge Into a Tape DriveLocation of Unload Button Removing a Cartridge From a Tape DriveRemoving a Cartridge From the Gripper Assembly Manual Release Screw Replacing a Cleaning CartridgePage Cartridge Information Handle CartridgesInspect Cartridges Maintain Cartridges Ultrium Cartridges Apply Cartridge LabelsValid Labels Label Type of Cartridge LTO Cartridge CodesUltrium Cartridge Label Write-Protect Switch Setting the Write-Protect SwitchSpecification L3 Cartridge L2 Cartridge L1 Cartridge LTO Gen 1, Gen 2, and Gen 3 Cartridge SpecificationsPage Supported Connections Adding the Control Path and the Data PathServerNet/DA To add the data path PMF CRU PMF CRU Adding the Control Path and Data Path Supported ConnectionTo add the data path SCF, issue this command Configuration Overview Series Rear View System Configuration Example Fiber-opticAdding the Control Path and Data Path Page Figure A-1. Library and Rack Dimensions SpecificationsFigure A-2. Tape Library and Rack Dimensions Tape Library Environment Tape Library Components WeightsTable A-1. Library Component Weights Table A-2. Library Environment SpecificationsTable A-4. Non-Country-Specific Cords PowerPower Cord Numbers and Receptacles Table A-3. Power Cord and ReceptaclesInstalling the Power Cords Figure A-3. Power Cabling Power Specifications Table A-5. Power for Library Without Tape DrivesTable A-6. Power for Base Unit and Two LTO Tape Drives Page Canadian Compliance Safety and ComplianceRegulatory Compliance Statements FCC ComplianceStatements-2 Laser Compliance European Union NoticeSafety Caution High Leakage Current Waste Electrical and Electronic Equipment WeeeSafety