HP N31.5 manual

Page 38

Random play

Skipping to another track

Searching for a passage

Previewing a CD

Using the Remote Control, you may have the Nº31.5 play tracks totally at random. To do this, press the 0 (zero) numbered key, then press play.

While random play is active, the letter R will appear preceding the track number on the display.

To cancel random play, press Stop.

You may skip to another track any time while a CD is playing. To move to an- other track, press next (track + on the remote) to go forward, or previous (track – on the remote) to go backward until the number of the track you want to play shows on the display. (You may also select the track using the numbered buttons on the Remote Control.) Play will resume as soon as the pickup reaches that track.

You may search for a particular passage on the CD using Search Forward

()and Search Reverse (). Scan the CD until the laser pickup reaches the passage you want to hear. The playing speed increases when you hold down Search Forward or Search Reverse, and the volume is reduced.

Note: If your Nº31.5 is Linked to a compatible Mark Levinson digi- tal processor (via the communication ports), you have the option of muting the volume completely during search. (See Setting Op- tions.)

As soon as you release the button, play resumes.

If you search past the beginning (or end) of a track, the laser pickup will move on to the previous (or next) track.

If you try to search forward past the end of a CD or program, the laser pickup will stop at the end of the last track.

If you try to search backward past the beginning of a CD or program, the laser pickup will stop at the beginning of the first track. When you release Search Re- verse, play will resume beginning with the first track.

Using the Nº31.5’s preview function, you may play only the introduction of each track on a CD, then resume normal play when you hear the track you like.

Once a CD is loaded and ready for play, press preview. Beginning with the first track, the Nº31.5 will play the first ten seconds of the track, skip to the second track and play the first ten seconds of that track, and so on. While the preview function is active, the track part of the display will flash.

To resume normal play, press preview again or press play.

38

Image 38
Contents Operating Manual Page Important Safety Instructions Table of Contents Introduction to Programming Unpacking and Placement Operating Voltage Frequency Quick Start… Warm up/break-in period Special Design Features Industrial Design Convenience Features Communications Links Setup and Installation Repeat this procedure for the other three spikes Connect a Digital Output to Your Processor Placement of Your Transport Insert Batteries in the Remote Control Front Panel See Top Panel Repeat A-B Program Review Top Panel Search Reverse Next CD Transport Assembly To overcome the magnet, you’ll need to give it a firm pull Display Infrared Receiver and Transmitter Remote Control SembliesNumeric Keypad No30 on No31, for example Miscellaneous Controls Battery Compartment Feet or less Rear Panel Class Laser ProductAC Power Cord Socket Digital OUTPUT, Eiaj Optical Basic Operation Page Page Page Introduction to Programming Delete Programming Advanced Programming Page Setting Options Available even without Linking Auto-Standby Madrigal Communications Link Linked amplifiers? you ask Conductor Source Component Link Cable Conductor Amp-Amp Link Cable Using Learning Remote Controls Place the Nº31.5 in ITS Front Panel Teaching Mode Operate Troubleshooting Linked Functions DON’T Work Care and Maintenance Canadian Warranty Obtaining Service Specifications Dimensions Installation Notes Page Madrigal Audio Laboratories, Inc. All rights reserved