HP Book 6000 manual Removing the Top Case Reassembly Notes

PCMCIA doors

Screw, M2.5x2mm

Cover, left corner

Screws, M2.5x6mm (3)

Screws, M2.5x4mm (2)

Screws,

M2.5x6mm (3)

Screws,

M2.5x6mm (2)

Touch pad flex cable

Docking doors

Panel, vent

Panel,

sound/IR

Cover, right corner

Figure 2-15. Removing the Top Case

Reassembly Notes

∙If you need to reinstall the sound/IR panel, make sure the volume control is oriented properly (pins facing inward). Insert the tabs on the end of the panel into the slots in the bottom case.

∙When reinstalling the right corner cover, first insert the tab at the back end of the cover into the case, then move the plug-in module latch forward and snap the cover over the latch and into place.

Caution

Be careful not to pinch the speaker wires when reinstalling the nearby retaining screws.

HP OmniBook 6000 Removal and Replacement 2-21