Using the Power Control Menu
The Power Control menu settings can save energy. The menu depends on the selected input source: an AV video source or a PC source.
Power Control Menu
AV video source | Options |
|
|
No Signal Off | Disable/Enable |
|
|
No Operation Off | Disable/Enable |
|
|
PC source |
|
|
|
Power Management | Off/Mode1/Mode2 |
|
|
Adjusting Power Control for an AV video source
■No Signal Off, when set to Enable, causes the TV to enter Standby Mode automatically if no signal is received for 15 minutes. When a TV program finishes, this function may not operate.
■No Operation Off, when set to Enable, causes the TV to enter Standby Mode automatically if the TV is not operated for 3 hours.
Adjusting Power Control for a PC source
The setting for Power Control for a PC source is Power Management. The options are:
■Off, the factory preset value, provides no power management.
■Mode 1 causes the TV to enter Standby Mode automatically if no signal is received for 8 minutes. The TV remains in Standby Mode even if you start using the PC and the signal returns. Turn the TV on by pressing the Power button on the TV or the remote control.
■Mode 2 causes the TV to enter Standby Mode automatically if no signal is received for 8 seconds. However, the TV turns on if you start using the PC and the signal returns.
n
■If using a digital PC and the Power Management setting is Mode2, the TV power may not turn back on automatically, even if the signal inputs again.
■If you turn off the power by disconnecting the AC cord when the Power Management setting is Mode2, the TV may not function properly after connecting the AC cord and turning the power on again. In such a case, turn the TV off and on again by pressing the Power button on the TV or the remote control.
Using the Setup Menu
The Setup menu options depend on the selected Input source; items appear that apply for the selected Input.
For example, Parental CTRL (used to select a secret number, and set the values for parental controls by TV rating, TV content, and movie ratings) does not appear when the selected input is Input4 (HDMI) or Input5 (DVI).
Setup Menu | Description |
|
|
EZ Setup | Starts guided setup. |
|
|
CH Setup | Scans for channels. |
|
|
Antenna | Adjust for broadcast digital TV |
Setup – Digital | signal and channel strength. |
|
|
Parental CTRL | Enable and define parental |
| controls for TV and movies. |
|
|
Position | Adjust image position on the |
| screen for AV or PC inputs. |
|
|
Input Signal | Manually sets image input |
| resolution from a PC. |
|
|
Auto Sync | Automatically adjusts the |
| image from a PC. |
|
|