HP LC3700N manual Starting EZ Setup, Using CH Setup, Using Antenna Setup Digital

Setup Menu	Description
Fine Sync	Manually adjusts the image
	from a PC.
Input Label	Selects a name (from a list) for
	the Input source.
Picture Flip	Sets the orientation of the
	picture.
Standby Mode	Sets the TV mode for standby.
Language	Sets the OSD language.

Starting EZ Setup

Select EZ Setup to start the first-time setup wizard.

To start EZ Setup:

1Press Menu on the remote control.

2Press the Up or Down arrow buttons to highlight Setup. Press Select.

3Highlight EZ Setup, and then press Select.

4If you set the Secret No., enter your 4-digit secret number. See “Secret number setting for parental control (AV input mode only)” on page 65.

5Follow the setup wizard instructions. For more information, refer to “Using the First-Time Setup Wizard” on page 29.

Using CH Setup

If the initial setup does not find all the channels, use CH Setup to manually set the antenna, scan, and find the channels.

Setting the antenna using Air/Cable option

The Air/Cable option defines what type of antenna and cable are connected to the TV analog and digital inputs.

n

The CATV system includes Standard, HRC, and IRC. Select the one that matches to your TV.

If channels are missing, or no channels are found after running CH Search, check your antenna connections, and then perform CH Setup again.

Scanning for channels using CH Search option

The CH Search option makes the TV look for all channels viewable from the signals connected to the TV inputs.

In the CH Search menu, highlight Yes for Analog, Digital (Air), and Digital (Cable). Then highlight Search Start and press Select; the scan automatically searches the selected inputs for channels.

Removing channels using CH Memory option

Use the CH Memory option to remove channels from the list of found channels. The removed channel does not appear when using the Channel buttons.

1Highlight CH Memory and press Select.

2Highlight Analog, Digital (Air), Digital (Cable), or CableCARD, and then press Select.

3Highlight the channel and press Select.

4Select Skip, highlight On, and press Select.

■On removes the channel.

■Off does not skip the channel.

Using Antenna Setup – Digital

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can set the antenna configuration through the Antenna Setting screen. Adjust for broadcast digital TV signal and channel strength using the Antenna Setup – Digital option.

■Signal Strength shows the current and maximum signal strength.

Changing the TV Settings 59

Changing the TV Settings