HP LC3700N manual Connecting a component device

To connect an i.LINK device, follow these steps:

1Connect the i.LINK cable (B) to the 4-pin i.LINK terminal (A). The i.LINK connector must match your device cable type. (There are no separate audio inputs for i.LINK.)

n

■Make sure the shapes of the terminal and the plug match, and insert the plug into the terminal straight, not on an angle.

■Use either one of the terminals. These two terminals do not differ in quality or function.

A

B

A:i.LINK connector on TV

B:i.LINK cable to i.LINK device

2Connect the cable to the i.LINK device.

3Turn on the device.

4Connect power to the TV (see page 25).

5Turn on the TV; see “Turning the TV On and Off (Standby)” on page 27.

6Select the input source for the TV by pressing the Input button on the remote control or on the TV, or press i.Link on the remote control and select the source.

7Define the i.LINK items in the Menu screen displays; refer to “Using the i.LINK Setup” on page 63.

For information on using and controlling an i.LINK device, refer to “Operating an i.LINK device” on page 37.

Connecting a component device

1Connect the component cable (B) to the

Component In (Y, Pb, Pr) connectors. There are two sets of component connectors you can use: Input 1 (A) or Input 2 (E). (Input 1 shown.)

UpSetting

A

E

B

C

D

Setting Up 21