Viewing questions
Symptom |
| Remedy |
|
|
|
I get a poor picture with video signal input. | Check the following: Improper control setting. Local interference. | |
|
| Cable interconnections. Adjust picture control as needed. Try |
|
| another location for the TV. Be sure that all connections are secure. |
|
|
|
I get a poor picture with DVI signal input. | Check the following: Improper control setting. Incorrect pin | |
|
| connections on the connector. Adjust picture controls as needed. |
|
|
|
Nothing appears on the screen, and I have | ■ Press the Input button on the remote control and confirm the | |
an external device controlling the TV. |
| source is selected. |
|
| ■ Verify that the external device or PC power is turned on. |
|
| ■ Check to see whether the source component is connected. |
|
| ■ Check the power management function. Is it in standby mode? |
|
| ■ Connect the source to the TV. Operate the external device or PC |
|
| (move the mouse, or press a key). |
|
|
|
Picture quality questions |
|
|
|
| |
Symptom | Remedy | |
|
| |
Part of my picture is cut off, or the | Check the position adjustment settings, and adjust the screen settings | |
picture is not centered. | accordingly. | |
|
| |
My picture image is too large or | Press the Aspect button on the remote control, and adjust properly. | |
too small. |
|
|
|
| |
My picture is unstable. | Verify that the external device or PC resolution setting is correct. Adjust to | |
| the appropriate resolution. | |
|
| |
There are bright spots on my LCD | In some cases, an LCD panel may have pixels that do not operate | |
screen. | properly. This is common to all LCD displays used in products supplied by | |
| all vendors and is not specific to this product. | |
|
|
|
Remote control questions |
|
|
|
| |
Symptom | Remedy | |
|
| |
The remote control does not work. | Check the following, and try the proposed solution: | |
| ■ Press the TV button to control the TV. | |
| ■ Batteries are inserted with polarity aligned. | |
| ■ Make sure the remote control batteries are fresh. If they are worn out, | |
|
| replace the batteries with three (3) new AAA alkaline batteries. |
| ■ Make sure the remote control is within correct operating range. | |
| ■ Make sure the remote sensor window is not under too much light, direct | |
|
| sunlight, or strong artificial light. |
| ■ Make sure there are no obstacles; check that there is nothing between | |
|
| the remote control and the sensor window on the display. |
|
|
|