HP LC3700N manual Using the Digital Setup Menu, Using the CableCARD Menu, Using the Video Setup

■Input Select sets the default type of signal or connectors for the device connected to Input1, Input2, Input3, Input4, Input5.

For Input1 and Input2, you can select Auto, Component, or Video.

For Input3, you can select Auto, Video, or S-Video.

For Input4, it is set to HDMI.

For Input5, you can select Digital PC, Analog PC, Digital AV, or Analog AV. Choose Analog PC if using an RGB-to-DVI converter cable.

■Output Select selects what controls the audio output: Fixed or Variable.

Fixed, the default setting, provides a constant volume level to the Monitor Out/Rec Out terminal, and the speakers adjust using the Volume buttons.

Variable provides a volume level to the Monitor Out/Rec Out terminal controlled by the TV volume; as you adjust the TV volume, the volume level to the external system also adjusts. Speakers are muted.

■Quick Shoot, when set to On, provides a clearer image for fast-action video. If video noise occurs, set the function to Off.

■Caption Setup selects options for Closed Caption; refer to “Using Closed Caption” on page 64.

■Program Title Display, when set to No, does not show program information when you change the channel.

Using the Digital Setup Menu

This menu allows you to set image options for a digital broadcast program or digital image. The options shown depend on the Input selected.

Digital Setup Menu	Description
CableCARD Menu	Shows CableCARD
	status or messages.
Video Setup	■	Screen Size
	■	REC Picture Size

Digital Setup Menu	Description
Audio Setup	Sets the Digital Audio
	Optical output mode.
i.LINK Setup	■	i.LINK Auto Switch
	■	Recording Mode
	■	Standby Mode
Identification	Shows information
	about the TV.

Using the CableCARD Menu

Use this menu to set CableCARD options or view messages. Refer to “Using a CableCARD” on page 13 to connect the digital cable and insert the CableCARD.

The item wording in the CableCARD menu depends on the manufacturer of the CableCARD.

If there is a white triangle at the right side of the screen, the screen is not showing the entire message. Press the direction arrow buttons on your remote control to display the rest of the message.

When there is a LINK button on the screen, there is a link to the next page. Press Select on the remote control to go to the next page.

Using the Video Setup

■Screen Size sets the format of a digital broadcasting image.

Screen
Size	Description
Manual	With 480i/480p/720p broadcasts,
	you can change the screen size to
	the size of your choice.
Auto	All broadcasts are converted and
	displayed in the 1080i format.

62HP Pavilion LCD HDTV User’s Guide