York DY 036 warranty Capacity Ratings ARI 210/2401, GAS Heat RATINGS1, Stage GAS Heat Ratings

343615-YTG-A-0807

•ROOF CURBS - Eight and fourteen-inch high roof curbs provide a water-tight seal between the unit and the finished roof. These full perimeter curbs meet the requirements of the National Roofing Contractors Association (NRCA) and are shipped knocked-down for field assembly.

Roof curbs are designed to fit inside the base rails of the unit and include both a wood nailing strip and duct hanger supports.

•HIGH ALTITUDE NATURAL GAS - Burner orifices and pilot orifices are provided for proper furnace operation at altitudes up to 6,000 feet.

•PROPANE - Burner orifices, pilot orifices and gas valve parts are provided to convert a natural gas furnace to propane.

•HIGH ALTITUDE PROPANE - Burner orifices and pilot orifices are provided for proper furnace operation at alti- tudes up to 6,000 feet. This accessory supplements the basic propane conversion kit.

•LOW NOX KIT - Required to reduce the emission of nitrogen oxides below 40 nano grams per joule.

•POWER EXHAUST - Our single input economizer options are available with power exhaust. Whenever the outdoor air intake dampers are opened for free cooling, the exhaust fan will be energized to prevent the condi- tioned space from being over-pressurized during econo- mizer operation.

The power exhaust option can only be used on bot- tom duct configurations.

TABLE 1:	CAPACITY RATINGS - (ARI 210/240)1
MODEL	MBH	EER2	SEER3		SOUND
				CFM	RATING
					(Db)4
DY036	35.6	12	14	1200	84
DY048	46.0	12	14	1600	83
DY060	59.0	11.6	14	1750	81

1.80/67°F Indoor and 95°F outdoor.

2.EER = Energy Efficiency Ratio at full load - the cooling capacity in Btu’s per hour (Btuh) divided by the power input in watts, expressed in Btuh per watt (Btuh/watt).

3.SEER = Seasonal Energy Efficiency Ratio.

4.Rated in accordance with ARI 270 Standard.

•BAROMETRIC RELIEF DAMPER - This damper acces- sory can be used to relieve internal building air pressure on units with an economizer without power exhaust. This accessory includes a rain hood, a bird screen and a fully assembled damper. With bottom duct connections, the damper should be mounted over the opening in the return air panel. With horizontal ductwork, the accessory should be mounted on the return air duct.

•ENTHALPY ACCESSORY CONTROL KIT - This kit contains the required components to convert a single enthalpy economizer to dual enthalpy.

•BURGLAR BARS - Mount in the supply and return openings to prevent entry into the duct work.

•FLUE EXHAUST EXTENSION KIT - In locations with wind or weather conditions which may interfere with proper exhausting of furnace combustion products, this kit can be installed to prevent the flue exhaust from entering nearby fresh air intakes.

•CO2 SENSOR - Senses CO2 levels and automatically overrides the economizer when levels rise above the present limits.

•COIL GUARD - Customers can purchase a coil guard kit to protect the condenser coil from damage. This is not a hail guard kit.

•HAIL GUARD - Hail Guard kit is available to prevent unit from hail damage. This is a sloped hood that fits above the coil.

•GAS PIPING KIT - This kit supplies all necessary fittings and shut off valve.

TABLE 2: GAS HEAT RATINGS1

MODEL	MBH	MBH	AFUE	TEMP
	INPUT	OUTPUT	(%)	RISE ºF
DY036N04	50	40	80.9	15 - 45
DY036N08	100	80	80.5	40 - 70
DY048N06	75	60	80.9	25 - 55
DY048N10	125	100	80.3	45 - 75
DY060N08	100	80	80.5	25 - 55
DY060N10	125	100	80.3	35 - 65

1. All units are single-stage heating.

TABLE 3: 2 STAGE GAS HEAT RATINGS

MODEL1	MBH INPUT		MBH OUTPUT		STEADY STATE EFFICIENCY		RISE		MINIMUM HEATING
	1ST STAGE	2ND STAGE	1ST STAGE	2ND STAGE	1ST STAGE	2ND STAGE	MIN.	MAX.	AIRFLOW (CFM)
DY036D06	45	75	35.8	60.8	79.4	81.1	35	70	790
DY036D10	69	115	55.2	92	80.0	80.2	55	90	950
DY048D06	45	75	35.7	60.8	79.4	81.1	25	70	790
DY048D10	75	125	60.4	100.6	80.5	80.5	45	75	1230
DY060D06	45	75	35.8	60.8	79.4	81.1	35	70	1010
DY060D10	75	125	60.4	100.6	80.5	80.5	45	75	1230

1. Models are 3Ø only.

Unitary Products Group 7