York BHP024 manual Application Data, Model BHP, B1HP Shipping Operating Corner Weights Unit Size

036-21528-003-A-0703

TABLE 17: APPLICATION DATA

			MODEL												BHP
											024		030		036		042			048
		MINIMUM AIR FLOW							COOLING		800		1000		1050		1300			1500
			(CFM)						HEATING		800		1000		1050		1400			1400
		MAXIMUM AIR FLOW							COOLING		900		1125		1200		1400			1600
			(CFM)						HEATING		900		1125		1200		1500			1600
	MINIMUM OPERATING TEMPERATURE IN CO							LING MODE			45		45		45		45			45
			(AMBIENT, °F)
		MIMINIM MIXED AIR IN COOLI				G M		DE			68 / 57		68 / 57		68 / 57		68 / 57			68 / 57
			(RETURN AIR, DB °F/WB °F)
		MINIMUM MIXED AIR IN HEATI				G M		DE
			(RETURND	AIR, °F)			OFGRAVITY				55		55		55		55			55
FRONTUNITOF4918		A26	B		23CENTER12			4734		B1HP		SHIPPING		OPERATING			CORNER WEIGHTS
										UNIT		WEIGHT		WEIGHT		A		B	C	D
										SIZE
										024		356		351		97		93	81	84
										030		353		348		96		93	81	84
										036		388		383		106		102	89	92
										042		440		435		120		115	101	104
										048		485		480		132		127	111	115

FIGURE 3 - CENTER OF GRAVITY AND WEIGHTS

CLEARANCES

UNIT CLEARANCES
(MINIMUM)
Front	12”
Back	0”
Left Side (Filter Access)	24”
Right Side	24”
Below Unit1	0”
Above Unit2	36” (For Condenser
	Air Discharge)		3'
1. Units may be installed on combustible floors made from
wood or class A, B or C roof covering.
2. Units must be installed outdoors. Overhanging structures
		FLEXIBLEDUCT
or shrubs should not obstruct outdoor air discharge outlet.
NOTE: FOR UNITS APPLIED WITH A ROOF CURB, THE
MINIMUM CLE ARANCE MAY BE REDUCED FROM 1
INCH TO 1/2 INCH BETWEEN COMBUSTIBLE ROOF
		COLLAR
CURB MATERIAL AND THE SUPPLY DUCT.

FOALLR OTHERHEATERS,

MINIMUMCLEARANCEOF1" ALLOFZEDUCTOINCHSIDESFORFORESTHEREAFTER,20&25FIRSTkW.3'

CLEARANCEALL

SIDESOFDUCTFOR.ENTIRELENGTH

FIGURE 4 - UNIT CLEARANCES

18 Unitary Products Group