HP XP24000, XP20000 manual AddVolumeSetting Tag Parameters

Table 20 AddVolumeSetting Tag Parameters

Layer	Column in	Parameter	Setting	Range of Values	Number of
	Spreadsheet				Characters
First layer			Information about external volumes and the primary path
	A	PathGroup	Path group	0 to 63231	5 decimal digits or
			number		fewer
	B	Port	Port number of	1A to GR	2 digits or fewer
			the primary path
	C	WWN	WWN of the	000000000000000	16 hexadecimal
			primary path	to	digits

FFFFFFFFFFFFFFFF

D	LUN	LU number set to	0000 to 0FFF
		the external
		volume
E	ExG	External volume	Grp: 1 to 16384
		group number	VPG: 1 to 4096
		and its sequential
		number. The
		format should be
		EGrp-VPG (for
		example,
		E16384-4096).
F	Attribute	• Normal:	•	Normal
		Maps an	•	R-CMD
		external

volume

•R-CMD: Maps a command device

G	CLPR	CLPR that is used	0 to 31
		to access the
		external volume
H	Emulation	Emulation type of	N/A
		the external
		volume. Write the
		same characters
		as the emulation
		type shown in
		“LDEV Capacity
		Information for
		Each Emulation
		Type” (page 154).
I	CacheMode	• Enable: Sets	•	Enable
		cache mode	•	Disable
		to Enable.

•Disable: Sets cache mode to Disable.

J	InflowControl	•	Enable: Sets	•	Enable
			inflow control	•	Disable
			to Enable.
		•	Disable: Sets
			inflow control
			to Disable.

4hexadecimal digits or fewer

Grp: 5 decimal digits or fewer

VPG: 4 decimal digits or fewer

N/A

2 decimal digits or fewer

16 characters or fewer in ASCII format

N/A

N/A

Mapping External Volumes 107