SSID
◦If you have selected the SLPR Limited check box on the SSID dialog box, only the SSIDs that can be used in SLPR selected on the SSID dialog box appear in the list.
◦If you have not selected the SLPR Limited check box on the SSID dialog box, all of the unused SSIDs appear in the list regardless of the selected SLPR.
Example: How to Map LDEVs Automatically
For instance, you map two external volumes that have the same emulation type, and create two LDEVs in each external volume.
To assign the number which starts 00:01:01 with 255 intervals to total four LDEVs that you created:
1.Select the two external volumes and
The LDEV Mapping (Auto) dialog box opens.
2.Configure the starting LDEV number and interval as follows:
•LDKC: 00
•CU: 01
•Interval: 255
•LDEV map: Select the cell in the row 1 and column 00.
3.Click OK.
LDEV numbers are automatically assigned as follows:
•The first LDEV: 00:01:01
•The second LDEV: 00:02:01
•The third LDEV: 00:03:01
•The fourth LDEV: 00:04:01
However, the Add Volume dialog box shows only the LDEV number assigned for the first LDEV of each external volume. In this case, 00:01:01... and 00:03:01... appear in the Add Volume dialog box.
Example: How to Map LDEVs Manually
This example shows how to map two external volumes that have the same emulation type, and create two LDEVs in each external volume.
To assign the desired number to total four LDEVs that you created:
1.Select the two external volumes and
The LDEV Mapping (Manual) dialog box opens.
2.Click the LDEV to which you want to assign an LDEV number in the LDKC:CU:LDEV column on the left of the LDEV Mapping (Manual) dialog box.
3.Select the desired LDKC number and the desired CU number to the specified LDEV from the list on the right of the LDEV Mapping (Manual) dialog box.
4.Click the cell of the desired LDEV number in the LDEV map on the right of the LDEV Mapping (Manual) dialog box (see Figure 30 (page 78)).
The selected cell turns blue and the assigned LDEV number appears in the LDKC:CU:LDEV column.