Connecting the Hardware | 7 |
|
|
5.If you have a printer cable attached to the computer’s parallel port, disconnect it from the computer and plug it into the tape drive’s connector shown below.
Drive’s power connector
Secure the connector by tightening the retaining screws.
Printer’s data cable
(If a printer is sharing the parallel port with the tape drive)
Printer connector
The data cable that came with your drive attaches to the computer’s parallel port and the tape drive’s remaining
Attach this end to | Attach this end to the | |
the tape drive. | ||
computer’s parallel port. | ||
|
6.Attach the