HP Routing Services -UX 11i v2 manual Default None

Page 69

NOTE

NOTE

NOTE

Conﬁguring gated

Conﬁguring the OSPF Protocol

Default: None (you must specify a value)

Range: Integer between 0 – 255

The hellointerval value must be the same for all OSPF routers.

•routerdeadinterval speciﬁes the time interval (in seconds) for which the Hello packets are not received from a router before it is considered down or inactive by its neighbors. This value must be a multiple of the hellointerval value.

Default: None (you must specify a value)

Range: 0 – 65535

The routerdeadinterval value must be the same for all OSPF routers.

•You can use the password authkey to validate the protocol packets received on the router interface. The value can be 1 to 8 decimal digits separated by periods, a 1-byte to 8-byte hexadecimal string preceded by 0x, or a string of 1 to 8 characters in double quotes.

Default: None

Range: Up to 8 bytes

To set an authkey value, you must set the authtype clause to 1 or simple for the area. See “Authentication” on page 77 for more information on using OSPF authentication.

Chapter 3

69

Image 69

Contents Manufacturing Part Number B2355-90777 August EditionWarranty Government LicenseCopyright Notice Trademark Notices Page Contents Contents Index Contents HP-UX Release Name and Release Identiﬁer Intended AudienceWhat Is in This Document Publishing HistoryDocument Organization Chapter Description Related Documentation HP-UX Internet Services Administrator’s GuideTypographical Conventions Mbone FAQBold HP Encourages Your FeedbackVersion of HP-UX that you are using Overview Overview Mrouted Routing Daemon Multicasting OverviewDvmrp Protocol Dvmrp Tunnel Dvmrp Tunnel MulticastEndpoint Class D IP Multicast Address Format IP Multicast AddressesMulticast Groups Mrouted Routing Daemon Advantages Gated Routing DaemonDeciding When to Use gated Routing Protocols RIP Ospf Comparison of RIP and Ospf ProtocolsRIP Ospf Gated Routing Daemon Gated Routing Daemon Chapter Conﬁguring mrouted Conﬁguring mrouted Conﬁguration Commands How to Conﬁgure mroutedTunnel Multicast Network Example Conﬁguration How to Conﬁgure mrouted How to Conﬁgure mrouted Starting mrouted Verifying mrouted Operation Displaying mrouted Routing Tables HUP Displaying mrouted Routing Tables Mrinfo Tool Multicast Routing Support ToolsMap-mbone Tool Netstat ToolMulticast Routing Support Tools Chapter Conﬁguring gated Conﬁguring gated Conﬁguration Overview Conﬁguring gated Protocol statements follow Converting the Conﬁguration File from 3.0 to Cp /etc/gated.conf /etc/gated.conf.30 RIP Protocol Statement Conﬁguring the RIP ProtocolDefault Range 1 Conﬁguration Options Example of Simple RIP Conﬁguration Simple RIP ConﬁgurationEnd Systems RoutersRIP Router Example of a Large RIP ConﬁgurationCluster Node Isolated Node Major RouterRoot Server Single NodeCluster or Root Server Node Major Router Controlling RIP TrafﬁcConﬁguring the RIP Protocol Conﬁguring the Ospf Protocol Areas Deﬁned in an Autonomous System AreaNetwork Router Area Conﬁguring the Ospf Protocol Planning Your Ospf Conﬁguration Enabling Ospf Deﬁning Areas Area Border Router Conﬁguration ExampleArea To Network a 193.2.1.33 Border Router To Network B Network Conﬁguration Example Networks StatementInterface Statement Conﬁguring the Ospf Protocol Default None Router 193.2.1.35 Network Multicast Router Interface ExampleRange 0 Non-Broadcast Router Interface ExampleRouter Network 193.2.1.35 193.2.1.33 Internet 193.2.1.46 Hellointerval value must be the same for all Ospf routers Conﬁguring the Ospf Protocol Point-to-Point Router Interface Example Router 193.2.1.1 193.2.1.2Stub Areas 193.2.1.20 193.2.1.17 193.2.1.18 193.2.1.19 Area RouterArea 15.13.115.156 Router a Router B Deﬁning BackbonesAuthentication Authkey pepe Authkey travisCost LAN 1 LAN 2 CostAS External Routes AS Boundary Routers Only Default Conﬁguring the Ospf Protocol Internal Router Non-Stub Area Sample Ospf ConﬁgurationArea Border Router Internal Router Stub Area Accessing the Ospf MIB RDP Server Conﬁguring RDPRDP Client RDP Client ServerSpecifying a Default Router Installing Static RoutesCustomizing Routes Setting Interface States Specifying Tracing Options Option Effect FilesDefault Preference Values of Routes Specifying Route PreferenceRoute Type Preference BGP Specifying Route Preference Importing and Exporting Routes Import StatementExport Statement Examples of import and export Statements Command Line Options for gated Starting gatedFlag Effect 100 Verifying That gated Is RunningTroubleshooting gated Checking for Syntax Errors in the Conﬁguration FileTracing gated Activity 102 Operational User Interface for gated gdcGated Routing Table Ripquery ToolOspfmonitor Tool Common Problems Problem 1 gated does not act as expected104 Chapter 105 106 Problem 2 gated deletes routes from the routing tableProblem 3 gated adds routes that appear to be incorrect 108 Problem 4 gated does not add routes that you think it must109 Index110 111 112 113 TOS