HP 7750 manual Operating the Cisco ICS Accessing the System

Page 10

Chapter 5 Operating the Cisco ICS 7750

Accessing the System

Note For a list of USB peripherals that have been tested on the Cisco ICS 7750, see the “Using Peripherals with SPE310s” section on page 5-19.

Step 1 Connect the monitor cable to the video port on the SPE310, and power on the monitor.

Step 2 Do one of the following, based on the type of peripherals that you are using:

•USB—Connect a USB keyboard to one SPE310 USB port, and connect a USB mouse to the other SPE310 USB port.

•PS/2—Connect the “Y” splitter cable for your keyboard and mouse to the keyboard/mouse port on the target SPE310. Then connect your keyboard and mouse to the available ends of the “Y” splitter cable.

Note If you are using the “Y” splitter cable to connect a PS/2 mouse and a keyboard to the SPE310, the keyboard and mouse must be connected at or before the time that the SPE310 is rebooted in order to be recognized by the operating system. A USB keyboard and mouse are usually recognized without rebooting the operating system.

Step 3 Use the keyboard, mouse, and monitor to access standard Windows utilities on the SPE310, such as Windows Explorer and the Control Panel.

 

Cisco ICS 7750 Installation and Configuration Guide

5-10

78-14165-03

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICS System Manager Accessing ICSConfigClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Click SSP Manager Determining the ICS System Manager VersionClick show tech-support Accessing SPE310s Accessing Cisco CallManagerClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Click the System Maintenance tab Accessing the Backup UtilityScheduling a Backup Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button
Top Page Image Contents