HP 7750 manual Switch# show startup-config

Page 28

Chapter 5 Operating the Cisco ICS 7750

Backing Up System Data

f.Password—The password that you use to gain access to the remote computer.

g.Domain Name—(optional) The domain name that you use to gain access to your network (for example, MyCompany_Eng).

Note Enter the domain name carefully. Because of a limitation in Windows 2000, even if you enter the wrong domain name, the backup will seem to complete successfully.

Step 4 Click Submit to start the backup.

Step 5 When the backup is complete, press Continue.

The Backup History page appears, showing information about the backup.

Step 6 You must manually back up the Cisco IOS configuration files for the SSP and each Flash-based MRP or ASI card (MRP300, MRP3-8FXS, MRP3-16FXS, or MRP3-8FXOM1).

a.Telnet to the MRP, ASI, or SSP card from the remote device (computer on the network) where you stored your backup files in Step 3 above.

Note If the remote device (computer on the network) where you stored your backup files does not have Telnet access to the chassis cards, you may save the backup configuration files on a PC that has Telnet access to the chassis cards and then copy them to the remote device.

b.Enter the enable command and your Cisco IOS enable password to enter privileged EXEC command mode:

Switch> enable

Password: password

Switch#

c.Enter the following command to display the startup configuration:

Switch# show startup-config

 

Cisco ICS 7750 Installation and Configuration Guide

5-28

78-14165-03

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICS System Manager Accessing ICSConfigClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Click SSP Manager Determining the ICS System Manager VersionClick show tech-support Accessing SPE310s Accessing Cisco CallManagerClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Accessing the Backup Utility Scheduling a BackupClick the System Maintenance tab Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button
Top Page Image Contents