HP 7750 manual Choose Start Run

Page 29

Chapter 5 Operating the Cisco ICS 7750

Backing Up System Data

d.Copy and paste the output from the show startup-config command into a text file where you stored your backup files:

–Choose Start > Run.

–Enter the following command to open Notepad:

notepad.exe

–Select and copy the startup-config output from the Telnet console, and paste it into the Notepad window.

Note Do not include the – More – lines if they are displayed in the output. Select the contents from the Telnet console, and copy them to the clipboard. Go to the Notepad window, and paste the clipboard contents.

If – More– is displayed at the bottom of the Telnet console, press the space bar to display the next screen. Copy from the Telnet console again, and paste to the Notepad window. Repeat until the entire startup configuration has been displayed, copied, and pasted.

–From Notepad, choose File > Save.

–Save the startup-config file under the Shared Pathname you entered in Step 3d in the “Using Backup Now” section on page 5-27(for example, \\hostname\sharename\path). Name the config file in this format: <backupname>_<hostname>, where backupname comes from the Backup Name in Step 3a in the “Using Backup Now” section on

 

 

Cisco ICS 7750 Installation and Configuration Guide

 

 

 

 

 

 

78-14165-03

 

 

5-29

 

 

 

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Operating the Cisco ICS Accessing the System After Initial Configuration Accessing the System During Initial ConfigurationOperating the Cisco ICS Accessing the System Click ICS 7700 System Setup Accessing ICSConfigAccessing ICS System Manager Navigating in ICS System Manager Using ICS System Manager Click show tech-support Determining the ICS System Manager VersionClick SSP Manager Click Applications Accessing Cisco CallManagerAccessing SPE310s Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Choose Start Run Accessing SPE310s Through TelnetAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp SSP Error Messages Best Practices for Using the Cisco IOS CLIICSConfig Tasks Operating the Cisco ICS Accessing the System Saving Configuration Changes Using Peripherals with SPE310sCD-ROM Drive and CD-ROM Drive Tray Best Practices for Using Peripherals with SPE310sKeyboards and Mice Monitors Determining the IP Address of an SPE310Backing Up System Data Tip Scheduling a Backup Accessing the Backup UtilityClick the System Maintenance tab Click Schedule Backup Operating the Cisco ICS Backing Up System Data Click Backup Now Using Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Click Shutdown/Restart Shutting Down the SystemClick the Shutdown ICS 7700 System button
Top Page Image Contents