HP 7750 manual Accessing Processor Cards Through the SAP

Page 12

Chapter 5 Operating the Cisco ICS 7750

Accessing the System

Step 3 Enter your login password.

Step 4 Enter the show version command:

card> show version

Accessing Processor Cards Through the SAP

The SAP provides console access to any other processor card in the

Cisco ICS 7750 chassis. By connecting your PC to the console port on the SAP, or by dialing in to a modem that is connected to the console port, you can access a menu that can help you debug and troubleshoot system cards.

To access this text-based menu, follow these steps:

Step 1 If your PC is not already directly connected to the SAP console port, you can use an RJ-45-to-DB-9 adapter with a rolled EIA/TIA-232 cable or the supplied console (blue) cable to make the connection, as follows:

•Connect the SAP console port to an available COM port on your PC.

Or

•Connect a modem to the SAP console port to enable a dial-up connection (9600 baud, maximum).

Note For instructions on how to connect the SAP directly to your PC, refer to the “Connecting to Card Ports” section on page 3-18. For instructions on how connect the SAP a modem and how to configure your modem for remote dial-up access to System Manager, refer to the “Connecting a Modem” section on page 4-39.

Step 2 On your PC, open HyperTerminal. On PCs running Windows 2000, a typical HyperTerminal path is Start > Programs > Accessories > Communications > HyperTerminal.

 

Cisco ICS 7750 Installation and Configuration Guide

5-12

78-14165-03

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICSConfig Accessing ICS System ManagerClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Determining the ICS System Manager Version Click SSP ManagerClick show tech-support Accessing Cisco CallManager Accessing SPE310sClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Accessing the Backup Utility Scheduling a BackupClick the System Maintenance tab Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button
Top Page Image Contents