HP 7750 manual Keyboards and Mice

Page 21

Chapter 5 Operating the Cisco ICS 7750

Accessing the System

Note If you fail to use the Unplug or Eject Hardware tool and if you plug in and unplug the CD-ROM drive many times, the drive may stop responding. If this happens, disconnect the CD-ROM drive, wait

5 minutes, and try reconnecting it again. If the drive still fails to respond, reboot the SPE310; it should be recognized after Windows reboots. If the CD-ROM still fails, contact your Cisco support representative.

•Using the CD-ROM drive tray:

–A CD-ROM drive tray is provided with the Cisco ICS 7750. The CD-ROM drive tray and the CD-ROM drive are not intended to be connected to the SPE310 for extended periods of time. Leaving the CD-ROM drive tray in place can interfere with airflow into the chassis. Always remove the CD-ROM drive and drive tray when you finish using them.

–The CD-ROM drive tray is designed only for the weight of the CD-ROM drive. Never place heavy objects or items other than the CD-ROM drive on the drive tray because placing such objects on the tray may damage the ventilation grille or may impede airflow into the chassis.

Keyboards and Mice

The following are best practices for using a PS/2 keyboard and mouse with

SPE310s:

•PS/2 keyboards and mice:

–Connect these devices before booting the SPE310, if possible. If you connect a PS/2 mouse or keyboard to an operational SPE310, you must reboot the SPE310 in order to use the PS/2 mouse or keyboard.

–Disconnect the “Y” splitter cable from the keyboard/mouse port on the SPE310 when these devices are not being used.

 

 

Cisco ICS 7750 Installation and Configuration Guide

 

 

 

 

 

 

78-14165-03

 

 

5-21

 

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operating the Cisco ICS Accessing the System After Initial Configuration Accessing the System During Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICSConfig Accessing ICS System ManagerClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Determining the ICS System Manager Version Click SSP ManagerClick show tech-support Accessing Cisco CallManager Accessing SPE310sClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Choose Start Run Accessing SPE310s Through TelnetAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp SSP Error Messages Best Practices for Using the Cisco IOS CLIICSConfig Tasks Operating the Cisco ICS Accessing the System Saving Configuration Changes Using Peripherals with SPE310sCD-ROM Drive and CD-ROM Drive Tray Best Practices for Using Peripherals with SPE310sKeyboards and Mice Monitors Determining the IP Address of an SPE310Backing Up System Data Tip Scheduling a Backup Accessing the Backup UtilityClick the System Maintenance tab Click Schedule BackupOperating the Cisco ICS Backing Up System Data Click Backup Now Using Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Click Shutdown/Restart Shutting Down the SystemClick the Shutdown ICS 7700 System button
Top Page Image Contents