HP 7750 manual Determining the IP Address of an SPE310, Monitors

Page 22

Chapter 5 Operating the Cisco ICS 7750

Accessing the System

Monitors

The following are best practices for using a monitor with SPE310s:

•Connecting a monitor—Connect the monitor cable to the SPE310 video port before turning on the monitor.

•Disconnecting a monitor—Power down the monitor before disconnecting the monitor cable from the video port on the SPE310.

Determining the IP Address of an SPE310

If you do not know the IP address of an SPE310, follow these steps:

Step 1 If your PC is not already directly connected to the SAP console port, use the supplied console cable (blue) to connect the SAP console port to an available COM port on your PC.

Step 2 Open a HyperTerminal session with the SAP (see the “Accessing Processor Cards Through the SAP” section on page 5-12).

Step 3 Log in as an administrator (username administrator), and enter your password (the default is changeme).

Step 4 Press Ctrl-backslash(\), and use the SAP menu to switch to the SPE310 running System Manager (this card is installed in slot 6 by default).

	Cisco ICS 7750 Installation and Configuration Guide
5-22	78-14165-03

Image 22

Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICS System Manager Accessing ICSConfigClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Click SSP Manager Determining the ICS System Manager VersionClick show tech-support Accessing SPE310s Accessing Cisco CallManagerClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Click the System Maintenance tab Accessing the Backup UtilityScheduling a Backup Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button