HP 7750 Best Practices for Using Peripherals with SPE310s, CD-ROM Drive and CD-ROM Drive Tray

Page 20

Chapter 5 Operating the Cisco ICS 7750

Accessing the System

Note USB devices requiring additional software or installation of non-native Windows 2000 drivers will probably not work with the Cisco ICS 7750. We therefore recommend against trying to use them. If you have additional questions or concerns about using USB devices with the Cisco ICS 7750, contact your Cisco support representative.

•PS/2 keyboards and mice:

–A “Y” splitter cable is provided with the Cisco ICS 7750 to enable you to connect a PS/2 mouse and a PS/2 keyboard to the SPE310.

–If you connect a PS/2 device to an SPE310 after the SPE310 boots, the SPE310 will need to be rebooted in order for the PS/2 device to be recognized by Windows 2000.

Best Practices for Using Peripherals with SPE310s

This section describes best practices for using peripherals with SPE310s.

CD-ROM Drive and CD-ROM Drive Tray

The following are best practices for using a CD-ROM drive and the CD-ROM tray with SPE310s:

•Connecting the CD-ROM drive—Do not connect the CD-ROM drive while the SPE310 is booting.

•Disconnecting the CD-ROM drive:

–If the SPE310 is running, use an attached monitor to locate the Unplug or Eject Hardware icon in the Windows System Tray (in the lower right corner of the screen, typically, unless the taskbar has been moved). The icon looks like a small card with an arrow floating above it. Click the icon. In the pop-up menu displayed, select Stop USB Mass Storage Device - Drive (D:).

–After Windows 2000 reports that the device has been stopped, you can safely disconnect the USB CD-ROM drive cable from the SPE310 USB port.

 

Cisco ICS 7750 Installation and Configuration Guide

5-20

78-14165-03

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Click ICS 7700 System Setup Accessing ICSConfigAccessing ICS System Manager Navigating in ICS System Manager Using ICS System Manager Click show tech-support Determining the ICS System Manager VersionClick SSP Manager Click Applications Accessing Cisco CallManagerAccessing SPE310s Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Accessing the Backup Utility Scheduling a BackupClick the System Maintenance tab Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button
Top Page Image Contents