HP 7750 manual Setting Security Privileges

Page 30

Chapter 5 Operating the Cisco ICS 7750

Setting Security Privileges

page 5-27, and hostname is the host name of the card. For example, an SSP configuration file could be named Backup1_Switch, and an MRP300 configuration file could be named Backup1_R00ffff900073.

Step 7 Repeat Step 6 for the SSP and for every Flash-based MRP or ASI card (MRP300, MRP3-8FXS, MRP3-16FXS, or MRP3-8FXOM1) in the chassis.

Step 8 If you have configured VLAN functionality on the Cisco ICS 7750, you may also back up the file vlan.dat from the SSP Flash memory. This file stores VLAN configuration information.

The procedure for backing up the vlan.dat file is the same as the procedure that is used for copying a Flash file to a network server. To copy the vlan.dat file to a TFTP network server, use the following command in EXEC mode from the command prompt on the SSP:

Switch#copy flash:vlan.dat tftp://<ip address of server>/<dir>/<filename>

where <ip address of server> is the IP address of the TFTP server, <dir> is the directory name on the TFTP server, and <filename> is the filename to write on the TFTP server.

Setting Security Privileges

To ensure that only persons with proper authorization have access to sensitive information, you can designate system passwords during initial configuration of ICS System Manager.

Note For additional information, refer to the ICS System Manager Online Help.

 

Cisco ICS 7750 Installation and Configuration Guide

5-30

78-14165-03

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating the Cisco ICS Accessing the System During Initial Configuration Accessing the System After Initial ConfigurationOperating the Cisco ICS Accessing the System Accessing ICSConfig Accessing ICS System ManagerClick ICS 7700 System Setup Navigating in ICS System Manager Using ICS System Manager Determining the ICS System Manager Version Click SSP ManagerClick show tech-support Accessing Cisco CallManager Accessing SPE310sClick Applications Programs Terminal Services Client Client Connection Manager Operating the Cisco ICS Accessing the System Accessing SPE310s Through Telnet Choose Start RunAccessing Processor Cards Through the SAP Operating the Cisco ICS Accessing the System Best Practices for Using Microsoft SQL Server Best Practices for Configuring Dhcp Best Practices for Using the Cisco IOS CLI SSP Error MessagesICSConfig Tasks Operating the Cisco ICS Accessing the System Using Peripherals with SPE310s Saving Configuration ChangesBest Practices for Using Peripherals with SPE310s CD-ROM Drive and CD-ROM Drive TrayKeyboards and Mice Determining the IP Address of an SPE310 MonitorsBacking Up System Data Tip Click the System Maintenance tab Accessing the Backup UtilityScheduling a Backup Click Schedule BackupOperating the Cisco ICS Backing Up System Data Using Backup Now Click Backup NowSwitch# show startup-config Choose Start Run Setting Security Privileges Shutting Down the System Click Shutdown/RestartClick the Shutdown ICS 7700 System button
Top Page Image Contents