Roberts Gorden BH-40 service manual Open windows, Immediately call your local gas, Instructions

Page 1

FOR YOUR SAFETY

Blackheat BH

If you smell gas:

1.

Open windows.

7.

Immediately call your local gas

2.

DO NOT try to light any appliance.

 

3.

DO NOT use electrical switches.

 

 

4.

DO NOT use any telephone in

 

 

 

your building.

 

 

5.

Extinguish any open flame.

 

 

6.

Leave the building.

 

 

 

supplier after leaving the building.

The Economical Unitary

 

instructions.

 

Follow the gas supplier’s

 

 

8.

If you cannot reach your gas

Infrared Heater

 

supplier, call the Fire Department.

 

 

 

 

WARNING

Installation, Operation &

 

 

 

 

 

 

 

 

Service Manual

 

 

 

 

BH-40

BH-125

 

 

 

 

 

Fire Hazard

BH-60

BH-140

 

 

 

Keep all flammable objects, liquids and

BH-80

BH-150

vapors the minimum required clear-

BH-100

BH-175

ances to combustibles away from

 

 

heater.

 

 

Some objects will catch fire or explode when placed close to heater.

BH-115 BH-200

Failure to follow these instructions can result in death, injury or property damage.

WARNING

 

Installer

Please take the time to read and understand

Improper installation, adjustment, alteration, service

these instructions prior to any installation.

or maintenance can result in death, injury or

Installer must give a copy of this manual to the owner.

property damage. Read the Installation, Operation

 

 

and Service Manual thoroughly before installing or

 

Owner

servicing this equipment.

Keep this manual in a safe place in order to provide

 

Installation must be done by a contractor qualified

your serviceman with necessary information.

 

 

in the installation and service of gas-fired heating

 

 

equipment or your gas supplier.

 

 

 

Roberts-Gordon LLC

 

 

1250 William Street

 

 

P.O. Box 44

 

 

Buffalo, New York 14240-0044

 

Telephone: +1.716.852.4400

 

 

Fax: +1.716.852.0854

 

 

Toll Free: 800.828.7450

 

 

www.rg-inc.com

 

© 2012 Roberts-Gordon LLC

www.radiantheaters.com

P/N 170102NA Rev. M 02/12

Image 1
Contents Or maintenance can result in death, injury or Improper installation, adjustment, alteration, serviceProperty damage. Read the Installation, Operation Installation must be done by a contractor qualifiedPage Roberts-Gordon LLC Page Table of Figures Page Manpower Requirements Heater SafetySafety Labels and Their Placement California PropositionTop and Bottom Panel Label Placement Side and Back Panel Label Placement Wall Tag Installer ResponsibilityNational Standards and Applicable Codes Clearances are the required distances that Maintain clearances to combustibles at all times for safetyC D InchesCentimeters ModelTube, Standard Reflector Model 45 Tilt Reflector ModelInches Centimeters Tube, Opposite 45 Reflector ModelCentimeters Model Venting InchesNational Standards and Applicable Codes Stainless Steel Major ComponentsBurner Tube Reflector End CapContents of BH-Series Burner Carton Standard Parts ListContents of Core and Extension Packages BH-Series Component Package Guide Model Tubing Length Core Packages Minimum Standard AluminizedHeater Installation Typical Suspension Details Linear Heater Assembly Overview Linear Heater Layout Overview Linear Heater Layout Overview Burner Tube InstallationCoupling and Tube Assembly Tube Clamp Package InstallationOpen Closed2 Coupling and Tube Assembly 1 Coupling and Tube AssemblyNot required on the BH-125/150/175/200 Turbulator InstallationHanger Burner Tube Reflector Description Part Number Reflector Support Package 1 Reflector, U-Clip and Reflector Support InstallationBurner Installation Optional Heater Accessories Tube Tube, StandardTube, Opposite Tube Heater Layout Overview Tube Layout Overview Elbow Package Configuration .2.1 Elbow Installation2 Elbow Installation Reflector Joint Detail 5 Reflector Joint Detail2 Side Reflector Installation Reflector Side Extension 1 Bracket InstallationDescription Part Number Lower Clearance Shield Package Distance a Extension 2 Frame Shield Installation3 Grille Installation 2 Grille End Cap InstallationUnited States Requirements VentingCanadian Requirements Horizontal Venting Unvented OperationVertical Venting Unvented Operation Tube TerminationCommon Side Wall Venting Vertical Ventilation 4 10 cm PipeOutside Wall Common Vertical Venting Outside Combustion Air Supply Vertical Outside Air Supply for Single Heater InstallationHorizontal Outside Air Supply for Double Heater Installation Vertical Outside Air Supply for Double Heater InstallationGAS Piping Correct Positions When attaching gas hoseHold gas nipple securely with pipe wrench Failure to follow these instructions can resultLine Voltage Thermostat Wiring WiringFront View Low Voltage Thermostat WiringInternal Wiring Ladder Diagram Electrical Connection to the Burner Pre-Season Maintenance and Annual Inspection Operation and MaintenanceSequence of Operation To Shut Off HeaterVehicles and Other Vicinity of the HeaterObjects ReflectorBlower Scroll, Wheel Safety LabelsMotor Burner Cup and Orifice ElectrodeTroubleshooting YES Troubleshooting Flow ChartPage Manifold Gas Pressure Setting Replacement Parts Replacement Parts Description Part Number Dimensions General SpecificationsGAS Pressure AT Manifold Pipe ConnectionPage ROBERTS-GORDON LLC will PAY for Warranty is Void ifROBERTS-GORDON LLC will not PAY for Limitations on Authority RepresentativesPage Page Page
Related manuals
Manual 70 pages 6.75 Kb Manual 20 pages 37.5 Kb