Roberts Gorden BH-40, BH-60, BH-150, BH-175, BH-115, BH-100, BH-140 service manual Economical Unitary

Page 1

FOR YOUR SAFETY

If you smell gas:

1.Open windows.

2.DO NOT try to light any appliance. GordonRay®BH

3.DO NOT use electrical switches.

4.DO NOT use any telephone in your building.

5.Extinguish any open flame.

6.Leave the building.

7.Immediately call your local gas supplier after leaving the building.

instructions.

The Economical Unitary

Follow the gas supplier’s

 

 

8. If you cannot reach your gas

Infrared Heater

supplier, call the Fire Department.

 

 

WARNING

Installation, Operation &

 

 

 

 

 

 

Service Manual

 

 

 

BH-40

BH-125

 

 

 

Fire Hazard

BH-60

BH-140

 

 

 

Keep all flammable objects, liquids and

BH-80

BH-150

vapors the minimum required clear-

ances to combustibles away from

BH-100

BH-175

 

 

heater.

 

 

Some objects will catch fire or explode when placed close to heater.

BH-115 BH-200

Failure to follow these instructions can result in death, injury or property damage.

WARNING

 

Installer

 

 

 

Please take the time to read and understand

 

 

Improper installation, adjustment, alteration, service

 

these instructions prior to any installation.

or maintenance can result in death, injury or

 

 

Installer must give a copy of this manual to the owner.

property damage. Read the Installation, Operation

 

 

 

 

and Service Manual thoroughly before installing or

 

Owner

servicing this equipment.

 

 

 

Keep this manual in a safe place in order to provide

Installation must be done by a contractor qualifiedyour serviceman with necessary information. in the installation and service of gas-fired heating

equipment or your gas supplier.

 

Roberts-Gordon LLC

 

 

1250 William Street

 

 

P.O. Box 44

 

 

Buffalo, New York 14240-0044

 

 

Telephone: +1.716.852.4400

 

 

Fax: +1.716.852.0854

 

 

Toll Free: 800.828.7450

 

 

www.rg-inc.com

 

© 2012 Roberts-Gordon LLC

www.radiantheaters.com

P/N 170101NA Rev. L 01/12

Image 1
Contents Economical Unitary Page Roberts-Gordon LLC Page Table of Figures Page Manpower Requirements Heater SafetySafety Labels and Their Placement California PropositionDescription Top and Bottom Panel Label PlacementDescription Part Number Side and Back Panel Label PlacementWall Tag Installer ResponsibilityNational Standards and Applicable Codes Clearances are the required distances that Maintain clearances to combustibles at all times for safetyC D InchesCentimeters Tube, Standard Reflector Model 45 Tilt Reflector ModelInches Centimeters Tube, Opposite 45 Reflector ModelVented UnventedNational Standards and Applicable Codes Stainless Steel Major ComponentsBurner Tube Reflector End CapContents of BH-Series Burner Carton Standard Parts ListCore Packages Minimum Standard Aluminized Heater Installation Run Length Typical Expansion Critical Hanger PlacementLinear Heater Assembly Overview Linear Heater Layout Overview Linear Heater Layout Overview Burner Tube InstallationCoupling and Tube Assembly Tube Clamp Package InstallationTube Clamp Package 2 Coupling and Tube Assembly 1 Coupling and Tube AssemblyTube Length ModelTurbulator Installation Turbulator InstallationHanger Burner Tube Reflector Description Part Number Reflector Support Package 1 Reflector, U-Clip and Reflector Support InstallationBurner Installation Optional Heater Accessories Tube Heater Assembly Overview Tube Heater Layout Overview Between Burner and Elbow Elbow Package Configuration .2.1 Elbow InstallationElbow Package Clip Package2 Elbow Installation Reflector Joint Detail 5 Reflector Joint Detail2 Side Reflector Installation Reflector Side Extension 1 Bracket InstallationDescription Part Number Lower Clearance Shield Package Distance a Extension 2 Frame Shield InstallationDescription Part Number Reflector Side Extension 01370412 3 Grille Installation 2 Grille End Cap InstallationUnited States Requirements VentingCanadian Requirements Horizontal Venting Unvented OperationVertical Venting Unvented Operation Tube TerminationCommon Side Wall Venting Vertical Ventilation 4 10 cm PipeCommon Vertical Venting Outside Combustion Air Supply Vertical Outside Air Supply for Single Heater InstallationDescription Part Number Vent Cap 4 10 cm 90502300 Description Part Number Vent Cap 6 15 cm 90502302 Vertical Outside Air Supply for Double Heater InstallationGAS Piping Correct Positions When attaching gas hoseHold gas nipple securely with pipe wrench Failure to follow these instructions can resultLine Voltage Thermostat Wiring WiringFront View Low Voltage Thermostat WiringInternal Wiring Ladder Diagram Electrical Connection to the Burner Pre-Season Maintenance and Annual Inspection Operation and MaintenanceSequence of Operation To Shut Off HeaterVehicles and Other Vicinity of the HeaterObjects ReflectorBlower Scroll, Wheel Safety LabelsMotor Burner Cup and Orifice ElectrodeTroubleshooting YES Troubleshooting Flow ChartPage Manifold Gas Pressure Setting Replacement Parts Replacement Parts Description Part Number Dimensions General SpecificationsGAS Pressure AT Manifold Pipe ConnectionPage ROBERTS-GORDON LLC will PAY for Warranty is Void ifROBERTS-GORDON LLC will not PAY for Limitations on Authority RepresentativesPage Page Page
Related manuals
Manual 70 pages 23.9 Kb Manual 20 pages 37.5 Kb